Mô đun rơ le 1 kênh 5V công tắc mức cao / thấp
₫ 19.000
Sản phẩm Mô đun rơ le 1 kênh 5V công tắc mức cao / thấp đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
1 Channel 5V Relay Module Board Shield with Optocoupler Support High and Low Level Trigger
One, module Description:
1, the module uses genuine quality relay, normally open interfaces Maximum load: AC 250V / 10A, DC 30V / 10A;
2, using SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
3, the module voltage 5V
4, the module can be set to trigger high or low with jumpers;
5, fault-tolerant design, even if the control line is broken, the relay will not operate;
6, the power indicator (green), relay state indicator (red)
7, user-friendly interface design, all interfaces are available through the wiring terminal direct connection leads, very convenient
8, module size: 50mm * 26mm * 18.5mm (L * W * H)
9 with four mounting bolts holes, hole 3.1mm, 44.5mm * 20.5mm pitch
Two, module interface:
1, DC +: positive power supply (
2, DC-: negative one
3, IN: can be high or low level control relay
Relay outputs:
1, NO: normally open relay interfaces, relay before hanging, pull back with COM
2, COM: Relay Common Interface
3, NC: normally closed relay interfaces, relay before with COM, pull vacant post
High and low end of the trigger selection:
-jumper LOW LOW trigger short-circuited;
-When the trigger is high with high short ju
One, module Description:
1, the module uses genuine quality relay, normally open interfaces Maximum load: AC 250V / 10A, DC 30V / 10A;
2, using SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
3, the module voltage 5V
4, the module can be set to trigger high or low with jumpers;
5, fault-tolerant design, even if the control line is broken, the relay will not operate;
6, the power indicator (green), relay state indicator (red)
7, user-friendly interface design, all interfaces are available through the wiring terminal direct connection leads, very convenient
8, module size: 50mm * 26mm * 18.5mm (L * W * H)
9 with four mounting bolts holes, hole 3.1mm, 44.5mm * 20.5mm pitch
Two, module interface:
1, DC +: positive power supply (
2, DC-: negative one
3, IN: can be high or low level control relay
Relay outputs:
1, NO: normally open relay interfaces, relay before hanging, pull back with COM
2, COM: Relay Common Interface
3, NC: normally closed relay interfaces, relay before with COM, pull vacant post
High and low end of the trigger selection:
-jumper LOW LOW trigger short-circuited;
-When the trigger is high with high short ju