Chân Vịt Máy May Gia Dụng Trục Thấp 1216
125.600
₫ 63.300
Sản phẩm Chân Vịt Máy May Gia Dụng Trục Thấp 1216 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 125.600 xuống còn ₫ 63.300, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
100% Brand New and High Quality
Item Type: Tape Binding Foot
Material: Stainless steel
Color: Sliver
Package Include: 1 x Bias Binder Tape Binding Foot
Features:
It is used to apply pre-folded bias binding tape or bias tape you have cut yourself to the edge of fabric in one easy
step.
It is equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zigzag or decorative stitches as well as straight stitch.
10 mm to 14 mm bias tape can be used.
Fit for All Low Shank Singer,Brother,Babylock,Viking (Husky Series),Euro-Pro, Janome,Kenmore,White,Juki,Bernina (Bernette Series),New Home,Necchi,Elna,etc.
Use Instructions:
-Before installing the presser foot, turn the trim strip inserted into the guide groove of the presser foot, trim selvage ensure alignment of the presser foot guide groove;
-Pull the trim strip from the rear of the presser foot;
-Install the presser foot;
-Adjust the needle position, until the needle point is located at the edge trim.
Tip: If you can not adjust the needle to the appropriate location on the trim, you can loosen the presser foot screw and move around to adjust the position of the guide gr
Item Type: Tape Binding Foot
Material: Stainless steel
Color: Sliver
Package Include: 1 x Bias Binder Tape Binding Foot
Features:
It is used to apply pre-folded bias binding tape or bias tape you have cut yourself to the edge of fabric in one easy
step.
It is equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zigzag or decorative stitches as well as straight stitch.
10 mm to 14 mm bias tape can be used.
Fit for All Low Shank Singer,Brother,Babylock,Viking (Husky Series),Euro-Pro, Janome,Kenmore,White,Juki,Bernina (Bernette Series),New Home,Necchi,Elna,etc.
Use Instructions:
-Before installing the presser foot, turn the trim strip inserted into the guide groove of the presser foot, trim selvage ensure alignment of the presser foot guide groove;
-Pull the trim strip from the rear of the presser foot;
-Install the presser foot;
-Adjust the needle position, until the needle point is located at the edge trim.
Tip: If you can not adjust the needle to the appropriate location on the trim, you can loosen the presser foot screw and move around to adjust the position of the guide gr
Sản Phẩm Liên Quan
HOT