Van Lốp Xe Đạp Mini Không Ruột Kèm Dụng Cụ Tháo Lắp Dễ Dàng

Specifications:
With the detachable valve core, removal tools, and the design that the sealant can be injected, the product is convenient for installation and use.
The product can be installed and used conveniently due to the detachable valve core, removal tools, and the design that the sealant can be injected.
What the product can offer you are the easy installation and simple use, because it has detachable valve core, removal tools, and the design that the sealant can be injected.
Thanks to the detachable valve core, removal tools, and the design that the sealant can be injected, the product is convenient to install and use.
It is convenient to install and use owing to the detachable valve core, removal tools, and the design that the sealant can be injected.
Features:
This is a one-way valve for charging and discharging the gas in the tire and maintaining the air pressure inside the tire.
The single way valve is able to effectively charge and discharge the gas in the tire and help maintain the air pressure inside the tire.
The function of the one-way valve is to effectively charge and discharge the gas in the tire and help maintain the air pressure inside the tire.
Effective charging and discharging the gas in the tire is the main function of the product, which can also help maintain the air pressure inside the tire.
The product has the ability to effectively charge and discharge the gas in the tire and help keep the air pressure inside the tire.
The length of the product is 5.1cm, the width is 1cm, and the height is 1cm. The length of the valve stem is 40mm, and the overall length is 55mm.
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension differences due to different manual measurements.
Before buying, please check carefully whether it is compatible with your wheels to prevent misfits later.

Installation Steps:
1. Check whether the spool valve is tight.
2. Remove the lock nut and O-ring.
3. Pass the valve stem through the valve hole on the edge.
4. Place the O-ring on the stem.
5. Screw the lock nut onto the valve stem.
6. Tighten the lock nut until the rubber end of the valve is tightened in the valve hole of the rim.

Package Includes:
2 x Cycling Tubeless Valve Stem
1 x Black Remove Tool
1 x A-shaped Wrench
4 x Valve