UNO Động Cơ Bước I2C Tb6612 Pca9685 Pwm Cho Arduino I2C V2
236.189
₫ 167.700
Sản phẩm UNO Động Cơ Bước I2C Tb6612 Pca9685 Pwm Cho Arduino I2C V2 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 236.189 xuống còn ₫ 167.700, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Motor drive board, steering gear, stepper motor, small DC motor are all done.
For I2C interface, if the motor is not enough, if one stack is added, the number of driving motors will double.
characteristic:
1. Fully compatible with the expansion of the interface
2. The address can be modified through I2C and communication
3. Two servos can be connected to directly output PWM drive
4. It can be connected to 4 DC brushed motors or 2 4-wire stepper motors
5. Using TB6612FNG motor drive chip, 1.2A drive capacity, 3.2A peak value, L298N module
Note: This product does not include motor and motherboard.
Make your own motor party with a motor shield and a fine assortment of motors!
The original L293D Motorshield kit is one of our most beloved kits, We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements:
Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
Instead of using a latch and the for Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any for Arduino.
Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
Tested compatible with for Arduino UNO, for Leonardo, for ADK/Mega R3, Due, Diecimila & Duemilanove. Works with Mega/ADK R2 and earlier with 2 wire jumpers.
Package:
1 x Standard I2C TB6612 Mosfet Stepper Motor PCA9685 PWM Servo Driver Shield V2 For Arduino Robot Uno Meg
For I2C interface, if the motor is not enough, if one stack is added, the number of driving motors will double.
characteristic:
1. Fully compatible with the expansion of the interface
2. The address can be modified through I2C and communication
3. Two servos can be connected to directly output PWM drive
4. It can be connected to 4 DC brushed motors or 2 4-wire stepper motors
5. Using TB6612FNG motor drive chip, 1.2A drive capacity, 3.2A peak value, L298N module
Note: This product does not include motor and motherboard.
Make your own motor party with a motor shield and a fine assortment of motors!
The original L293D Motorshield kit is one of our most beloved kits, We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements:
Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
Instead of using a latch and the for Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any for Arduino.
Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
Tested compatible with for Arduino UNO, for Leonardo, for ADK/Mega R3, Due, Diecimila & Duemilanove. Works with Mega/ADK R2 and earlier with 2 wire jumpers.
Package:
1 x Standard I2C TB6612 Mosfet Stepper Motor PCA9685 PWM Servo Driver Shield V2 For Arduino Robot Uno Meg
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000