Thiết bị thu phát EP2 RX ELRS 2.4Ghz RX ES24TX cho máy bay không người lái FPV
₫ 482.300
Sản phẩm Thiết bị thu phát EP2 RX ELRS 2.4Ghz RX ES24TX cho máy bay không người lái FPV đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Stuff is always REDY stock!
Because we UPDATE every day.
Please order!
Description:
The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
The PP RX is designed by Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
On the base of PP rx, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1 / EP2 is the same like PP RX and use ESP8285 MCU. So you can upgrade firmware by WIFI, that 's too simple.
Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
Specifications:
Ep2 Nano Receiver item Name
Type: ISM
Esp8285 MCU
Sx1280Imltrt RF Module
Smd Ceramic antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receiving refresh rate: 500Hz
Minimum refresh rate receiver: 25Hz
Working voltage: 5v.
Weight: 0.44g.
Dimension: 10mm x 10mm x 6mm
Peak gain: 3.7dB
Range: 2KM above.
Open area means the receiving range refers to the test data without obstruction, using fixed-wing flying altitude greater than 150 meters, and transmitter power above 100mw.
Notes:
Since the Official perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1 / EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the Official firmware when Official perfect target available.
Package Included:
1 x EP2 Nano Rec
Because we UPDATE every day.
Please order!
Description:
The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
The PP RX is designed by Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
On the base of PP rx, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1 / EP2 is the same like PP RX and use ESP8285 MCU. So you can upgrade firmware by WIFI, that 's too simple.
Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
Specifications:
Ep2 Nano Receiver item Name
Type: ISM
Esp8285 MCU
Sx1280Imltrt RF Module
Smd Ceramic antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receiving refresh rate: 500Hz
Minimum refresh rate receiver: 25Hz
Working voltage: 5v.
Weight: 0.44g.
Dimension: 10mm x 10mm x 6mm
Peak gain: 3.7dB
Range: 2KM above.
Open area means the receiving range refers to the test data without obstruction, using fixed-wing flying altitude greater than 150 meters, and transmitter power above 100mw.
Notes:
Since the Official perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1 / EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the Official firmware when Official perfect target available.
Package Included:
1 x EP2 Nano Rec
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000