Thiết Bị Kiểm Tra Tốc Độ Động Cơ Servo Kỹ Thuật Số
₫ 38.600
Sản phẩm Thiết Bị Kiểm Tra Tốc Độ Động Cơ Servo Kỹ Thuật Số đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,1 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Product specifications:
(1) output: 15ma (5.0)
(2) input: dc 4.2-6.0v
(3) output signal: 1.5 ms ±0.5 ms
(4) size: 46x32 x 17mm
(5) weight: 8g
(6) regulation: manual, automatic, medium.
Features: can easily detect and set server virtual, jitter, and median.
Can connect two sets of rudder or electromodulation; single chip control, good stability, high precision.Turn the knob to detect the rudder.
If you connect to an electronic speed governor (with or without a brush), you can remove remote control equipment for manual speed regulation for test tuning
The speeder or motor is very practical and does not have to be cumbersome to connect remote control and receiver.It is equivalent to a hand
Function of moving receiver "to simulate the rudder of a transmitter by means of a knob
Usage note: refer to the following picture, the left side of the steering machine, divided into 3 groups, can take 3 steering machines.;One-row plug-in power supply on the right side, near the side is the negative pole (see identifier number), the battery negative pole, be careful not to be re-reactive, if the power supply counter-burn ic;The pins corresponding to the s identifier are ignored.Turn on the power supply, the blue light will be on at the same time, then only the first on the left, for manual regulation of the potentiometer test, press the button, the middle light will be on, for the back-to-center test; the third light light will be onThe test mode is the same as the servo, but the input end is no longer connected to the power supply. the test motor needs to be electrically adjusted first, just as the test mod
(1) output: 15ma (5.0)
(2) input: dc 4.2-6.0v
(3) output signal: 1.5 ms ±0.5 ms
(4) size: 46x32 x 17mm
(5) weight: 8g
(6) regulation: manual, automatic, medium.
Features: can easily detect and set server virtual, jitter, and median.
Can connect two sets of rudder or electromodulation; single chip control, good stability, high precision.Turn the knob to detect the rudder.
If you connect to an electronic speed governor (with or without a brush), you can remove remote control equipment for manual speed regulation for test tuning
The speeder or motor is very practical and does not have to be cumbersome to connect remote control and receiver.It is equivalent to a hand
Function of moving receiver "to simulate the rudder of a transmitter by means of a knob
Usage note: refer to the following picture, the left side of the steering machine, divided into 3 groups, can take 3 steering machines.;One-row plug-in power supply on the right side, near the side is the negative pole (see identifier number), the battery negative pole, be careful not to be re-reactive, if the power supply counter-burn ic;The pins corresponding to the s identifier are ignored.Turn on the power supply, the blue light will be on at the same time, then only the first on the left, for manual regulation of the potentiometer test, press the button, the middle light will be on, for the back-to-center test; the third light light will be onThe test mode is the same as the servo, but the input end is no longer connected to the power supply. the test motor needs to be electrically adjusted first, just as the test mod
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000