Thiết Bị Chẩn Đoán Lỗi Ô Tô Mini Elm327 Obdii Obd2 Kết Nối Bluetooth Cho Android V2.1
80.000
₫ 64.000
Sản phẩm Thiết Bị Chẩn Đoán Lỗi Ô Tô Mini Elm327 Obdii Obd2 Kết Nối Bluetooth Cho Android V2.1 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 80.000 xuống còn ₫ 64.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Decription:
Feature:
The device works on OBD2 gasoline cars (1998 and newer cars in the USA), and EOBD cars (cars from Europe, gasoline cars from 2001). Bluetooth connection, no Batteries, Cables, or Switches. - Wireless (Bluetooth) 5 ~ 10 meters.
Notice: 1.NOT for iOS ! For iPhone & iPad, please choose "WiFi for iOS and Android". 2. NOT for vehicles. 3. For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
Suitable for system: mainly used with Android system phones, also supports Symbian system phones, Windows system PCs and laptops. Compatible App: Recommended Apps are Torque Pro, Torque Lite (free), OBD Car Doctor (free), etc. on Google Play. Work with Android cellphone and tablet. Or There are various Apps and installation instructions provided on the CD. But Partial Apps need to be charged. You can run the CD to select the appropriate App.
How to use: Plug the device in your car's OBD2 port, start the car, enable Bluetooth on your Android phone or tablet, search for "OBDII" and pair with it (pin 1234), run the downloaded App with simple settings and wait until it connects your car's ECU successfully. If you use the same OBD on 2 or more cars, you need to disconnect Bluetooth and close App when finish testing one car, and re-match the Bluetooth when you insert the OBD into another car.
Displaying sensor data:
1. Engine speed
2. The calculated load value
3. Coolant temperature
4. Condition of the fuel system
5. Vehicle speed
6. Minute fuel trim
7. Long-term fuel trim
8. Boost pressure in the intake
9. The timing advance
10. Intake
11. Airflow
12. Absolute Throttle Position
13. Voltage of the oxygen sensor voltages / associated short term fuel trim
14. Fuel pressure
Multi-Protocol Support:
1.ISO9141-2(5 baud init,10.4Kbaud)
2.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
3.ISO14230-4 KWP(fast init,10.4 Kbaud)
4.ISO15765-4 CAN(11bit ID,500 Kbaud)
5.ISO15765-4 CAN(29bit ID,500 Kbaud)
6.ISO15765-4 CAN(11bit ID,250 Kbaud)
7.ISO15765-4 CAN(29bit ID,250 Kbaud)
Note: Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer's implementation.
Included:
1 x EOBD / OBD2 Bluetooth Diagnostic Device
1 x CD with English Soft
Feature:
The device works on OBD2 gasoline cars (1998 and newer cars in the USA), and EOBD cars (cars from Europe, gasoline cars from 2001). Bluetooth connection, no Batteries, Cables, or Switches. - Wireless (Bluetooth) 5 ~ 10 meters.
Notice: 1.NOT for iOS ! For iPhone & iPad, please choose "WiFi for iOS and Android". 2. NOT for vehicles. 3. For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
Suitable for system: mainly used with Android system phones, also supports Symbian system phones, Windows system PCs and laptops. Compatible App: Recommended Apps are Torque Pro, Torque Lite (free), OBD Car Doctor (free), etc. on Google Play. Work with Android cellphone and tablet. Or There are various Apps and installation instructions provided on the CD. But Partial Apps need to be charged. You can run the CD to select the appropriate App.
How to use: Plug the device in your car's OBD2 port, start the car, enable Bluetooth on your Android phone or tablet, search for "OBDII" and pair with it (pin 1234), run the downloaded App with simple settings and wait until it connects your car's ECU successfully. If you use the same OBD on 2 or more cars, you need to disconnect Bluetooth and close App when finish testing one car, and re-match the Bluetooth when you insert the OBD into another car.
Displaying sensor data:
1. Engine speed
2. The calculated load value
3. Coolant temperature
4. Condition of the fuel system
5. Vehicle speed
6. Minute fuel trim
7. Long-term fuel trim
8. Boost pressure in the intake
9. The timing advance
10. Intake
11. Airflow
12. Absolute Throttle Position
13. Voltage of the oxygen sensor voltages / associated short term fuel trim
14. Fuel pressure
Multi-Protocol Support:
1.ISO9141-2(5 baud init,10.4Kbaud)
2.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
3.ISO14230-4 KWP(fast init,10.4 Kbaud)
4.ISO15765-4 CAN(11bit ID,500 Kbaud)
5.ISO15765-4 CAN(29bit ID,500 Kbaud)
6.ISO15765-4 CAN(11bit ID,250 Kbaud)
7.ISO15765-4 CAN(29bit ID,250 Kbaud)
Note: Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer's implementation.
Included:
1 x EOBD / OBD2 Bluetooth Diagnostic Device
1 x CD with English Soft