Thiết bị cảnh báo tốc độ cho xe ô tô HUD Head Up Display MPH / KMH Speed Temp

Description:
Product Features:
1. Available for cars with OBDII and EUOBD port(Car automatic diagnosis system). Plug and play.
2. 3 inch HD screen display.
3. Multi-color design makes the screen more easier to read.
4. Nano-technology eliminates double reflections to be more clear.
5. Display rich contents: speed, rpm, water temperature, voltage, low voltage alarm, high water temperature alarm, over speed alarm. Freely switch between kilometers & miles.
6. Auto power on/off: HUD start up and off with vehicle started and shutdown, a effective protection of the car battery. Also retaining the manual switch mode, more easy to control HUD.
7. Automatic and manual brightness adjustment mode, driving without glare.
Reflective film installation:
Using the unit without the reflective film may result in a double image observed by the user depending on the windshield. If you see a double layer it is due to the windshields dual layer construction and you should install the film by following the instructions below:
1. Place the supplied non-slip mat in the desired position on the dashboard with the HUD on top.
2. Observing where the HUD reflects place the reflective film in position.
a. Ensure the surface is clean and dry before installing the film;
b. Remove the back protective side marked (1) and attach the film to the clean windscreen;
c. Once you’re satisfied with the location use a credit card or similar to remove any bubbles or air pockets that remain;
d. Remove the front side marked (2), pls adjust the place of nonslip mat to make information can be fully display
Specifications:
1. HUD size: 9 * 5.4 * 1.2cm / 3.6 * 2.2 * 0.5in
2. Type: Head up display M6
3. Voltage:12V
4. Wire or Wireless:wired
5. Color: Black
6. Material Type:ABS+PC
7. Display type:Digital
8. Screen Size:3.5 inches
9. Color: black
10. Material: plastic
11. Environment temperature: -40℃~80℃
12. Barometric press: 86-106KPa
13. Relative humidity: 10%-95%
14. Environment voice: <=60dB
15. Alarm of sound level: >=30dB(A)
16. Work voltage: 9V~16Vdc(12Vdc/400mA)
17. OBDII Cable Length:1.95M
Package Included:
1 * M6 Head Up Display
1 * OBDII Connector
1 * Non-slip mat
1 * Reflecting Film
1 * User M