TESLA Mô-Đun Máy Phát Điện Zvs Dc 12v-30v 1000w
240.000
₫ 131.000
Sản phẩm TESLA Mô-Đun Máy Phát Điện Zvs Dc 12v-30v 1000w đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 240.000 xuống còn ₫ 131.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
About the length of the discharge arc: input voltage 12 V / 5A, the distance of the high voltage discharge arc is about 1-2 CM. The higher the input voltage and current, the higher the output power, the longer the distance of the discharge arc, when the input is a maximum of 30 V / 10 a, the distance may exceed 5 CM. If the arc is too short, check that the input power is sufficient.
High-voltage package: The greater the power, the better. Driving the high-voltage package with ZVS is already overloading the high-voltage package. Therefore, breakdown damage is a normal phenomenon, not a high-voltage package quality problem, please try not to work for a long time under high power
High-voltage winding: For the primary winding, please use 1.5MM square wire 5 turns + 5 turns (that is, 10 turns of center tap) in the same direction (please bring your own wire)
Description:
Input Voltage: DC 12 V-30 V
Power requirements: less than 12 v greater or equal to 5a, above 15 v greater or equal to 15a
Operating frequency: adaptive 30 KHz-50 KHz
Secondary parameters: 5 T + 5 T
Size: 74mm x 77.8mm
For power: The output power circuit depends on the input power, if you only have 30 W of power, even if you want to be a ZVS with 200 W, it can not reach 100 W or 200 W, so the input power must be adequate, power = voltage x current!
Colour: blue, black
Material: plastic
Package Contents:
1 x ZVS driver boardOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
High-voltage package: The greater the power, the better. Driving the high-voltage package with ZVS is already overloading the high-voltage package. Therefore, breakdown damage is a normal phenomenon, not a high-voltage package quality problem, please try not to work for a long time under high power
High-voltage winding: For the primary winding, please use 1.5MM square wire 5 turns + 5 turns (that is, 10 turns of center tap) in the same direction (please bring your own wire)
Description:
Input Voltage: DC 12 V-30 V
Power requirements: less than 12 v greater or equal to 5a, above 15 v greater or equal to 15a
Operating frequency: adaptive 30 KHz-50 KHz
Secondary parameters: 5 T + 5 T
Size: 74mm x 77.8mm
For power: The output power circuit depends on the input power, if you only have 30 W of power, even if you want to be a ZVS with 200 W, it can not reach 100 W or 200 W, so the input power must be adequate, power = voltage x current!
Colour: blue, black
Material: plastic
Package Contents:
1 x ZVS driver boardOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000