Bảng Mạch Điều Khiển Động Cơ Bước Tb6600 4a 9-42v Cho Máy In 3d 1.7a 40n.cm
₫ 333.000
Sản phẩm Bảng Mạch Điều Khiển Động Cơ Bước Tb6600 4a 9-42v Cho Máy In 3d 1.7a 40n.cm đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.
Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32 subdivision of the 6 els are optional.
Stepper Motor: 40Ncm holding torque; Rated current 1.7A and resistance 1.5ohms; 1.8 deg. step angle; bipolar 4-wire.
Tips:Please make sure the motor connect to a constant current or chopper drive controller before you test motor.Connecting the motor directly to a power supply will destroy the motor.Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work.
TB6600 Stepper Motor Driver:
Single chip bipolar sine microstep stepper motor driver.
New BiCD 0.13 nm process.Up to 42V.
5 subdivision e options(1/1,1/2,1/4,1/8,1/16,1/32).
Output current:IOUT=4.0A(peak,in 100ms).
rated output:IOUT=3.5 A
Resistance(a+)=0.4
Alarm output pin current:Ialert=1mA
Monitoring output pin(MO):Imo=1mA
Break through the traditional,single power supply.
Built in overheating protection(TSD)circuit.
Undervoltage protection,built-in(UVLO)circuit.
Built-in overcurrent detection(ISD),circuit.
Can control 2 phase stepper motor forward and reverse rotation,With 1-2,W1 -2,2W1 -2,4W1 -2 phase excitation e.
Nema 17 Stepper Motor:
Motor type:Bipolar Stepper
Phase Resistance:1.5Ohm
Phase Inductance:2.8mH
Detent Torque:2.2N.cm
Rotor Inertia:54g.cm2
Holding Torque:40N.cm
Step angle:1.8 deg
Motor Weight:280g
Step angle accuracy:+ -5%(full step,not load)
Resistance accuracy:+ -10%
Inductance accuracy:+ -20%
Temperature rise:80deg Max(rated current,2 phase on)
Ambient temperature:-20deg-+50deg
Insulation resistance:100MΩ Min,500VDC
Insultion Strength:500VAC for one minute
Connection:Red(A+),Green(A-),Yellow(B+),Blue(B-)
colour:Black+sier
Material:ABS+metal
Package Contents:
1 * TB6600 Motor Driver
1 * Nema 17 Motor
1 * Mounting Bracket
4 * M4 Screws
4 * M3 Screws
2 * Inner Hexagon Spanner
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32 subdivision of the 6 els are optional.
Stepper Motor: 40Ncm holding torque; Rated current 1.7A and resistance 1.5ohms; 1.8 deg. step angle; bipolar 4-wire.
Tips:Please make sure the motor connect to a constant current or chopper drive controller before you test motor.Connecting the motor directly to a power supply will destroy the motor.Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work.
TB6600 Stepper Motor Driver:
Single chip bipolar sine microstep stepper motor driver.
New BiCD 0.13 nm process.Up to 42V.
5 subdivision e options(1/1,1/2,1/4,1/8,1/16,1/32).
Output current:IOUT=4.0A(peak,in 100ms).
rated output:IOUT=3.5 A
Resistance(a+)=0.4
Alarm output pin current:Ialert=1mA
Monitoring output pin(MO):Imo=1mA
Break through the traditional,single power supply.
Built in overheating protection(TSD)circuit.
Undervoltage protection,built-in(UVLO)circuit.
Built-in overcurrent detection(ISD),circuit.
Can control 2 phase stepper motor forward and reverse rotation,With 1-2,W1 -2,2W1 -2,4W1 -2 phase excitation e.
Nema 17 Stepper Motor:
Motor type:Bipolar Stepper
Phase Resistance:1.5Ohm
Phase Inductance:2.8mH
Detent Torque:2.2N.cm
Rotor Inertia:54g.cm2
Holding Torque:40N.cm
Step angle:1.8 deg
Motor Weight:280g
Step angle accuracy:+ -5%(full step,not load)
Resistance accuracy:+ -10%
Inductance accuracy:+ -20%
Temperature rise:80deg Max(rated current,2 phase on)
Ambient temperature:-20deg-+50deg
Insulation resistance:100MΩ Min,500VDC
Insultion Strength:500VAC for one minute
Connection:Red(A+),Green(A-),Yellow(B+),Blue(B-)
colour:Black+sier
Material:ABS+metal
Package Contents:
1 * TB6600 Motor Driver
1 * Nema 17 Motor
1 * Mounting Bracket
4 * M4 Screws
4 * M3 Screws
2 * Inner Hexagon Spanner
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1