Tấm phim in chuyển nước chuyên dụng kích thước 0.5X1m
109.600
₫ 61.000
Sản phẩm Tấm phim in chuyển nước chuyên dụng kích thước 0.5X1m đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 109.600 xuống còn ₫ 61.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Specification:
Brand new
Water Operation Temperature: 25-35°C
Thickness:Approx. 0.035mm
Dimension:Approx. 0.5*1m
Pattern:As the Pictures Shown
Application range: can be applied to the surface of the materails such as hardware(brass, iron, aluminum, copper, etc.), wood, plastic(ABS, PU, PP, PE, PVC, etc.), stone, ceramic, glass, etc.
Applicable industries: autos, electronic products, household appliance, daily arts and crafts, indoor, footwear, sports apparatus, etc.
Tensile properties, pattern is not easy deformation.
Environment friendly, it will not bring pollution to the natural environment.
Not easy to fade, waterproof, enduring aesthetic appearance.
Water transfer film , also called cubic transfer printing, is a way to do the printing on the surface that is irregular, which overcomes the problem facing offset printing that can not reach the tongued and grooved face.
Storage :
The film should be covered by plastic when store. A heavy / dark trash bag is perfect.
Film Storage: 18-25°C
Optimum Temperature: 21.5°C
Humidity: 45-65%
Do not open until ready to use to prevent contact with the air. Water Transfer Printing Film is a Hygroscopic Substance. It has the ability of attracting and holding water molecules from the surrounding environment. Do not store near water or in the room where your dip tank is located.
Avoid direct sunlight.
How To Use:
Step 1.Base coating: Mix well the paint obtaining the color that you need.
Step 2.Film selections: Select printing film that you need.
Step 3.Place film: Cut out the fit size, place it flatly on water surface.
Step 4.Activation: Spray the activator uniformly on the film after placing the film on the water 60-90 seconds.
Step 5.Transfer: Keep 35 degrees, with a fixture alignment film paper uniform downward pressure.
Step 6.Soaking: About 30 seconds.
Step 7.Washing: Remove the remaining film.
Step 8.Drying: Remove the product' surface water.
Package Included:
1 x Water Transfer Printing Film
Note:
Please allow minor deviation due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the it
Brand new
Water Operation Temperature: 25-35°C
Thickness:Approx. 0.035mm
Dimension:Approx. 0.5*1m
Pattern:As the Pictures Shown
Application range: can be applied to the surface of the materails such as hardware(brass, iron, aluminum, copper, etc.), wood, plastic(ABS, PU, PP, PE, PVC, etc.), stone, ceramic, glass, etc.
Applicable industries: autos, electronic products, household appliance, daily arts and crafts, indoor, footwear, sports apparatus, etc.
Tensile properties, pattern is not easy deformation.
Environment friendly, it will not bring pollution to the natural environment.
Not easy to fade, waterproof, enduring aesthetic appearance.
Water transfer film , also called cubic transfer printing, is a way to do the printing on the surface that is irregular, which overcomes the problem facing offset printing that can not reach the tongued and grooved face.
Storage :
The film should be covered by plastic when store. A heavy / dark trash bag is perfect.
Film Storage: 18-25°C
Optimum Temperature: 21.5°C
Humidity: 45-65%
Do not open until ready to use to prevent contact with the air. Water Transfer Printing Film is a Hygroscopic Substance. It has the ability of attracting and holding water molecules from the surrounding environment. Do not store near water or in the room where your dip tank is located.
Avoid direct sunlight.
How To Use:
Step 1.Base coating: Mix well the paint obtaining the color that you need.
Step 2.Film selections: Select printing film that you need.
Step 3.Place film: Cut out the fit size, place it flatly on water surface.
Step 4.Activation: Spray the activator uniformly on the film after placing the film on the water 60-90 seconds.
Step 5.Transfer: Keep 35 degrees, with a fixture alignment film paper uniform downward pressure.
Step 6.Soaking: About 30 seconds.
Step 7.Washing: Remove the remaining film.
Step 8.Drying: Remove the product' surface water.
Package Included:
1 x Water Transfer Printing Film
Note:
Please allow minor deviation due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the it
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000