Miếng dán cửa kính một chiều tự dính màu bạc phản quang bảo vệ sự riêng tư


₫ 132.200

Sản phẩm Miếng dán cửa kính một chiều tự dính màu bạc phản quang bảo vệ sự riêng tư đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam

SPECIFICATIONS:
Thickness: 2mil
VLT: 18%
IR Rejection: 82%
UV Rejection: 99%

KEY FEATURES:

DAYTIME PRIVACY PROTECTION - This window tint film only provides good privacy during daytime while the exterior glass shows the mirror effect. When the inside light is stronger than outside, the mirror effect will be reversed. Remember to draw curtain during night.

INSULATION&ENERGY SAVING - Blocking out 88% of the solar rays by reflecting it away from the window, which can keep cool in summer and retain heat in winter, helping you save money by cutting the high energy bills.

UV REJECTION - Blocking out 87% uv rays,reduces fading of interior furnitures caused by the sun.

EASY TO INSTALL - Self adhesive.Easy to remove the backing:Use 2 pieces of tape to apply to both sides of the corners and pull.Spray a lot of water to the window and film when you install.

SAFETY PROTECTION - To strengthen the glass,reduce the damage caused by splashing glass fragments.

Installation Instructions:

Step 1: Make sure your windows are thoroughly cleaned.

Step 2: Spray the windows with A LOT OF soapy water.

Step 3: Measure the exact dimensions of your windows and carefully cut the film to the right size.

Step 4: Remove transparent backing film from backing protect sheet, and spray A LOT OF soapy water onto the back side of the film

Step 5: Pick up the wet film by the top two corners to paste the wet side of the film onto the wet glass, smooth the film with hands.

Step 6: Spray the water onto the surface facing you, use the squeegee to remove extra water and air from center with proper strength.

Step 7: Make sure the four corners are steadily adhered to the glass, trim off the margins, leaving 2-3 mm gap from the edge of the glass to the film.

Step 8: Rewet the the surface of entire film and remove all the bubbles, wipe out surface water with a lint free towel.

Useful Tips:

MORE SOAPY WATER WHEN INSTALLATION - Remember to closely follow the installation manual and use lots of soapy water to prevent the film from sticking everywhere and bubbl

Sản Phẩm Liên Quan

HOT

Bikini hàng Âu

₫ 400.000
HOT
HOT

Bikini Thái

₫ 300.000
HOT

Bikini OKISS- QCXK

₫ 400.000
HOT

Bikini xuất Âu

₫ 300.000