Tai Nghe Bluetooth Không Dây Chống Nhiễu Rảnh Tay Gắn Mũ Bảo Hiểm Cho Xe Mô Tô
518.300
₫ 260.500
Sản phẩm Tai Nghe Bluetooth Không Dây Chống Nhiễu Rảnh Tay Gắn Mũ Bảo Hiểm Cho Xe Mô Tô đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 518.300 xuống còn ₫ 260.500, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
Item type:bluetooth Headset
-bluetooth transmission rate is fast and stable, 10-40 meters transmission distance
-Ultra low power consumption, continuous playing music for 13 hours (100 volume playback)
-English voice prompts for power on, power off, pairing success, low battery, maximum volume, etc
-Can be used in most motorcycle helmets on the market, can be installed in DIY, simple and convenient
Specification:
Model: A93427
bluetooth Specification: V4.2+EDR/A2DP/AVRCP/HFP
Frequency Range: 2.4026GHz-2.480GHz
Transmission Distance:10-40m
Channel: Stereo
Speaker Parameters: 24 ohms / 30mm
Speaker Power: 30 mW*2
Signal to Noise Ratio: 110dB
Siri: Support
Lithium Battery: 3.7V/250mAh
Play Time: 13 hours (100 volume playback)
Talk Time: 18 hours or more
Standby Time: 700 hours or more
Charging Time: About 2.5 hour
Installation:
-Remove the inner lining of the ear part of the helmet, tear off the release paper of the magic sticker surface, and stick the magic sticker on the ear part of the helmet, stick one on each side, and press it firmly to make it stick firmly.
-Tear off the release paper of the crocheted magic sticker, put the magic sticker on the back of the earphone, stick one on each side, and press it firmly to make it stick firmly.
-Attach the earphone with the microphone tube and the button to the magic sticker of the left ear of the helmet, and press it to make it stick firmly. Install the inner lining of the left ear back into the helmet, and position the microphone and USB charging head to ensure that the microphone is facing the mouth (if the adjustment is not in place, it may affect the call).
-Pass the sub-headphone through the top of the helmet and buckle it on the rough surface of the helmet's right ear. Press it firmly to make it stick firmly. Then install the inner lining at the right ear.
-The headset can be disassembled, the magic sticker fix is better, pay attention not to use too much force when disassembling, so as not to pull the magic stickeroff.
Tips:*Headphones need to be close to the ear to achieve the best sound.
*Different brands of helmets on the market have different lining depths at the ears. Buyers need to adjust the height of the headphones in the helmet so that the headphones are as close as possible to the ear for the best experience.
Package includes:
1 x bluetooth Headset
1 x User Manual
1 x USB Cable
3 x Microphone Sponge Cover
4 x Adhesive magic sticker
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Item type:bluetooth Headset
-bluetooth transmission rate is fast and stable, 10-40 meters transmission distance
-Ultra low power consumption, continuous playing music for 13 hours (100 volume playback)
-English voice prompts for power on, power off, pairing success, low battery, maximum volume, etc
-Can be used in most motorcycle helmets on the market, can be installed in DIY, simple and convenient
Specification:
Model: A93427
bluetooth Specification: V4.2+EDR/A2DP/AVRCP/HFP
Frequency Range: 2.4026GHz-2.480GHz
Transmission Distance:10-40m
Channel: Stereo
Speaker Parameters: 24 ohms / 30mm
Speaker Power: 30 mW*2
Signal to Noise Ratio: 110dB
Siri: Support
Lithium Battery: 3.7V/250mAh
Play Time: 13 hours (100 volume playback)
Talk Time: 18 hours or more
Standby Time: 700 hours or more
Charging Time: About 2.5 hour
Installation:
-Remove the inner lining of the ear part of the helmet, tear off the release paper of the magic sticker surface, and stick the magic sticker on the ear part of the helmet, stick one on each side, and press it firmly to make it stick firmly.
-Tear off the release paper of the crocheted magic sticker, put the magic sticker on the back of the earphone, stick one on each side, and press it firmly to make it stick firmly.
-Attach the earphone with the microphone tube and the button to the magic sticker of the left ear of the helmet, and press it to make it stick firmly. Install the inner lining of the left ear back into the helmet, and position the microphone and USB charging head to ensure that the microphone is facing the mouth (if the adjustment is not in place, it may affect the call).
-Pass the sub-headphone through the top of the helmet and buckle it on the rough surface of the helmet's right ear. Press it firmly to make it stick firmly. Then install the inner lining at the right ear.
-The headset can be disassembled, the magic sticker fix is better, pay attention not to use too much force when disassembling, so as not to pull the magic stickeroff.
Tips:*Headphones need to be close to the ear to achieve the best sound.
*Different brands of helmets on the market have different lining depths at the ears. Buyers need to adjust the height of the headphones in the helmet so that the headphones are as close as possible to the ear for the best experience.
Package includes:
1 x bluetooth Headset
1 x User Manual
1 x USB Cable
3 x Microphone Sponge Cover
4 x Adhesive magic sticker
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1