Súng Hút Thiếc Hàn Sắt Bằng Nhôm
73.000
₫ 52.700
Sản phẩm Súng Hút Thiếc Hàn Sắt Bằng Nhôm đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 73.000 xuống còn ₫ 52.700, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Note:
Please allow 1-3 cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
Specifications:
Range of temperature regulation: 1°
Scope of application: Tin removal
Net weight: approx. 40g
Length: approx. 200mm/7.87\'\'
Material: Half aluminum half plastic / whole aluminum
Maximum suction: 30
Operation Manual:
-Put the tin suctioner piston downward pressure to get stuck.
-Heating solder joints to solder melting with electric soldering iron.
-Remove the iron and quickly put the tin suctioner resistance paste solder, solder sucker and press the button.
-If It is not clean at one time and can be repeated many times.
Using skills:
-To ensure good solder sucker piston seal. Before electricity, with your fingers to plug hole solder sucker head, solder sucker head to press the button, if the piston is not easy to pop into place, that the seal is good.
-The aperture tin suctioner heads are of different sizes, select the appropriate specifications.
-Tin suctioner head wears, should replace the new one.
-Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity.
-Head contact pads are slightly longer, when solder melts, the solder joint pin as the center, then hand out in a clockwise direction to draw a circle, and then press the button tin sucti
Please allow 1-3 cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
Specifications:
Range of temperature regulation: 1°
Scope of application: Tin removal
Net weight: approx. 40g
Length: approx. 200mm/7.87\'\'
Material: Half aluminum half plastic / whole aluminum
Maximum suction: 30
Operation Manual:
-Put the tin suctioner piston downward pressure to get stuck.
-Heating solder joints to solder melting with electric soldering iron.
-Remove the iron and quickly put the tin suctioner resistance paste solder, solder sucker and press the button.
-If It is not clean at one time and can be repeated many times.
Using skills:
-To ensure good solder sucker piston seal. Before electricity, with your fingers to plug hole solder sucker head, solder sucker head to press the button, if the piston is not easy to pop into place, that the seal is good.
-The aperture tin suctioner heads are of different sizes, select the appropriate specifications.
-Tin suctioner head wears, should replace the new one.
-Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity.
-Head contact pads are slightly longer, when solder melts, the solder joint pin as the center, then hand out in a clockwise direction to draw a circle, and then press the button tin sucti
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000