Soxii Spot Welder 18650 Battery Rechargeable Handheld Portable Machine with Heat Shrink Tube Nickel Sheet for Household

Feature:
1. Low power consumption soft and hard design, the measured current is a few when turned off, so you don’t have to worry that the battery will be used up after a long time, which will affect the battery life.
2. This spot welding machine can automatically detect the trigger 0.8s after the soldering pen touches the nickel sheet. It is necessary to judge the trigger time, and the soldering pen before the point is clicked.
3. With special power management and software design, the gear will not return to 0 without resetting during the welding process. When the battery power changes, the solder joints may become weak.
4. When charging, the power light will remind you as a breathing light, and the light will always be on when it is fully charged. To prevent accidents during charging, the welding function is not available during charging.
5. Comes with a charging management control module, which can be charged through the mobile phone charging head. It can weld hundreds of solder joints for commonly used nickel‑plated sheets within 0.1mm‑0.15mm.

Specification:
Item Type: Spot Welder
Material: ABS
Usage: Spot Welder Machine
Battery Type: Lithium Battery (Built In Battery)
Battery Model: 18650
Nominal Battery Capacity: 4300mAh
Pulse Time: Six Gears Adjustable (1-6-1 Gear Cycle, 6 Gears Maximum)
Trigger Delay: 0.8 Seconds
USB Charger: Voltage 5V, Current Greater Than 1A

Package List:
1 x
Spot Welder2 x Heat Shrink Tubes1 x USB Charging Cable1 x Spot Welding Nickel Sheet

Note:
1. After the user's product is in hand, generally the battery is not fully charged, please fully charge it before using it to get the best results.
2. This machine can weld 0.1‑0.15mm nickel‑plated steel sheet and 0.1 pure nickel sheet. It is not possible to weld pure copper materials with good conductivity.
3. Don't keep the battery power too low or too high if you don't use it for a long time.
4. If the power consumption is too low, the single‑chip microcomputer will not work, it will be unable to turn on the machine, and the charging light will not be on. Please charge if this happens, and it will restore after tens of minutes.
5. Current, voltage, and materials can affect the spot welding effect. Not all materials can get a good spot welding effect. What can now be adjusted is the spot welding time and the dynamism of contact. It is recommended that you practice your hands with a tin can first, and then weld the battery after you are familiar with the welding machine.
6. This machine is DIY by hand, and the appearance is slightly scratched and burrs are normal.

How to Use