SONY Quạt Tản Nhiệt Cho Ps4 Pro

1. Connect the power cord correctly.
2. Turn the switch to ON position to start the fan.
3. At this time, you can press the TURBO button to make the TURBO bounce, the fan will slow down and the wind will weaken.
4. When the switch is set to AUTO, it enters the automatic e: (within 10 minutes of starting) the fan will automatically start when the temperature rises, and the fan will automatically stop working when the temperature drops (about 38Celsius).
5. When working, if all 5 fans are not rotating, please turn the switch to OFF position, press the TURBO key to make the TURBO key in the pressed state, and then turn it back to ON position.

1. Scope of application: suitable for PS4 PRO host
2. Working voltage: DC5V
3. Adaptor specifications: input AC100V-240V 50/60HZ, output DC5V1A, cable length 1.8M
4. Fan specifications: Large fan: DC5V0.15A, rotating speed 4500+/-10%RPM; Small fan: DC5V0.12A, rotating speed 6000+/-10%RPM
5. Product accessories: a power cord
Product maintenance and precautions:
1. The input power supply must be a stable DC5V standard voltage; the output current of the power supply needs to be greater than equal 1000mA.
2. Please check whether the accessories of this product are in good condition before use.
3. Make sure that the product is properly connected when it is switched on.
4. When the product is not used for a long time, please unplug it from the host and put it away.
5. It is forbidden to store or use this product in a humid environment.
6. If the wire becomes hot during use, please stop using it.
7. If this product is exposed to rain, water, or broken, please stop using it and send it to the professional maintenance department for disposal in time. Do not disassemble it yourself.
8. Please do not place the product in a high temperature placeor throw the product into a fire.
colour:Black
Material:ABS
size:8.1 x 5.7 x 32.2cm

Package Contents:
1 x cooling fan for ps4 pro

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1