Soldering iron Kit Adjustable Temperature 220V 60W / 80W LCD Electric Solder Rework Iron Station Welding Tools Accessories
₫ 143.850
Sản phẩm Soldering iron Kit Adjustable Temperature 220V 60W / 80W LCD Electric Solder Rework Iron Station Welding Tools Accessories đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Temperature Calibration:
1.After 60 seconds of power on, put the soldering tip on a thermometer,
and a moderate amount of solder on the soldering tip; make the test
point and the soldering tip have good touch.
2.When thermometer displays a stable temperature (about 2 seconds),
write down the temperature.
3.Move soldering iron away from thermometer;
press the (-) and (+) button at the same time to enter
temperature Calibration.
4.Input adjustment quantity. Adjustment quantity=set
temperature - measured temperature (see example)
5.Press the (-) and (+) at the same time to exit
temperature interface, finished.
Example 1, when setting temperature is 350℃ while
measured temperature is 342℃, the correction steps
are as follows:
a.press the (-) and (+) at the same time to enter
temperature correction interface.
b.press the "+" button till the LCD displays 8℃
c.press the (-) and (+) at the same time to exit
temperature correction interface
Example 2, when setting
temperature is 350℃ while
measured temperature is
330℃,the correction steps
are as follows:
a.press the (-) and (+)
at the same time to enter
temperature correction
interface.
b.press the (-) button till
the LCD displays -20℃
c.press the (-) and (+)
at the same time to exit
temperature correction
inte
1.After 60 seconds of power on, put the soldering tip on a thermometer,
and a moderate amount of solder on the soldering tip; make the test
point and the soldering tip have good touch.
2.When thermometer displays a stable temperature (about 2 seconds),
write down the temperature.
3.Move soldering iron away from thermometer;
press the (-) and (+) button at the same time to enter
temperature Calibration.
4.Input adjustment quantity. Adjustment quantity=set
temperature - measured temperature (see example)
5.Press the (-) and (+) at the same time to exit
temperature interface, finished.
Example 1, when setting temperature is 350℃ while
measured temperature is 342℃, the correction steps
are as follows:
a.press the (-) and (+) at the same time to enter
temperature correction interface.
b.press the "+" button till the LCD displays 8℃
c.press the (-) and (+) at the same time to exit
temperature correction interface
Example 2, when setting
temperature is 350℃ while
measured temperature is
330℃,the correction steps
are as follows:
a.press the (-) and (+)
at the same time to enter
temperature correction
interface.
b.press the (-) button till
the LCD displays -20℃
c.press the (-) and (+)
at the same time to exit
temperature correction
inte
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000