Set 5 Mô Đun Điều Khiển Động Cơ Bước A4988 Cho Máy In 3d
Sản phẩm Set 5 Mô Đun Điều Khiển Động Cơ Bước A4988 Cho Máy In 3d đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 234.700 xuống còn ₫ 118.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Color: Green,Red
Automatic current decay mode detection / selection
Package Included:5 X A4988 Stepper Driver +5X Heatsink
3.3 and 5 V compatible logic supply
Low RDS (On) Output
Internal UVLO
Thermal shutdown circuitry
Load short-circuit protection
Synchronous rectification for low power dissipation
Mix with slow current decay modes
Cross-current protection
Ground fault protection
Optional step five modes: full, 1/2, 1/4, 1/8 and 1/16
Features:
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power sequencing.