Set 5 đầu cắt của bút điện điêu khắc dành cho công việc chế biến gỗ
310.620
₫ 199.920
Sản phẩm Set 5 đầu cắt của bút điện điêu khắc dành cho công việc chế biến gỗ đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 310.620 xuống còn ₫ 199.920, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Package Includes：
Type 1
1 x Electric chisel
5 x Cutter head
1 x Wrench
Type 2
1 x Electric chisel
1 x Flexible rubber shaft
5 x Cutter head
1 x Wrench
Specifications:
Uses: woodworking
Head type: Hex clamping nut
Handle material: nylon
Overall length: 160mm
Features:
In addition to general wood, it is also possible to engrave ebony, soft plastic and so on.
The casing is solid, the heat dissipation efficiency is excellent and safe.
Mainly used for wood, furniture carving, antique floor carving, potted plants, toys, figures, animals and other sculptures.
Each electric chisel is equipped with 5 special cutter heads and a small wrench.
The new electric woodworking carving chisel, carving knife instead of traditional hand-carving, saves time and effort.
Tips:
The electric chisel needs to be equipped with a hanging mill or a small table mill or a drill shaft.
The shaft with a soft shaft can be used on a flexible shaft that can be removed.
It cannot be used alone, and the motor speed should be less than 12,000 rpm.
When using the engraving knives, it must be installed on the right side of the mill or the reverse direction will destroy the flexible shaft.
With a 10-point hand, you must stop the 2-3 minute hand to avoid overheating the product.
Notice:
1.Please allow 1-2cm error due to manual measurement.Please make sure you do not mind before you bid.
2.The colors may have different as the difference display,please unders
Type 1
1 x Electric chisel
5 x Cutter head
1 x Wrench
Type 2
1 x Electric chisel
1 x Flexible rubber shaft
5 x Cutter head
1 x Wrench
Specifications:
Uses: woodworking
Head type: Hex clamping nut
Handle material: nylon
Overall length: 160mm
Features:
In addition to general wood, it is also possible to engrave ebony, soft plastic and so on.
The casing is solid, the heat dissipation efficiency is excellent and safe.
Mainly used for wood, furniture carving, antique floor carving, potted plants, toys, figures, animals and other sculptures.
Each electric chisel is equipped with 5 special cutter heads and a small wrench.
The new electric woodworking carving chisel, carving knife instead of traditional hand-carving, saves time and effort.
Tips:
The electric chisel needs to be equipped with a hanging mill or a small table mill or a drill shaft.
The shaft with a soft shaft can be used on a flexible shaft that can be removed.
It cannot be used alone, and the motor speed should be less than 12,000 rpm.
When using the engraving knives, it must be installed on the right side of the mill or the reverse direction will destroy the flexible shaft.
With a 10-point hand, you must stop the 2-3 minute hand to avoid overheating the product.
Notice:
1.Please allow 1-2cm error due to manual measurement.Please make sure you do not mind before you bid.
2.The colors may have different as the difference display,please unders
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000