Set 44 Miếng Dán Thêu Chữ Cái Tiếng Anh Trang Trí Quần Áo
8.999
₫ 4.999
Sản phẩm Set 44 Miếng Dán Thêu Chữ Cái Tiếng Anh Trang Trí Quần Áo đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 8.999 xuống còn ₫ 4.999, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Size : 1
Style : Iron-On
Feature : 3D
Feature : Eco-Friendly
Model Number : 1
Technics : Beaded
Easy to use method: You can directly sew the cloth to the clothes with the same color thread.
Complete method of use:
1. Keep the back clean before ironing, adjust the temperature to the temperature suitable for the clothes according to the method of using the iron.
2. Put the cloth on the right place, the side with hot-melt adhesive is attached to the clothes (do not tear off the adhesive), preheat the iron, and paste the front from the cloth
Ironing for about 15 seconds, so as to fix the position of the cloth stick, you can also use the needle thread to fix the cloth stick position before ironing to prevent the cloth stick from shifting.
Then put the cloth stickers in the fixed position together with the clothes in reverse, iron from the reverse side for 30-60 seconds to ensure that the adhesive glue melts, and finally iron from the front
For 1-2 minutes, especially the corners, iron twice more hard to ensure that the surface is smooth and smooth, which is perfectly combined with the clothes.
3. In order to prevent burns, you can put a thin layer of cotton cloth on the cloth (must be cotton, but not a faded cloth). Check after finishing
Check the edges to see if they are hot, and burn the edges a few more times.
4. The temperature depends on the thickness of the decals. For thicker ones, the temperature must be higher and the scalding time longer. For extra thick cloth stickers, you can iron a few more times on the back.
5. Special attention: for cloth stickers with sequins or brighter surfaces (because the sequins are plastic products), be sure to put a layer of cloth and use a low temperature
Ironing (below 150 ℃), or directly using a steam iron. Or put a damp cloth on it. In order to avoid excessive temperature, the plastic sheet will melt.
6. The best way is to sew a few stitches on the edge of the cloth with the needle thread after ironing it, which is more firm and comfort
Style : Iron-On
Feature : 3D
Feature : Eco-Friendly
Model Number : 1
Technics : Beaded
Easy to use method: You can directly sew the cloth to the clothes with the same color thread.
Complete method of use:
1. Keep the back clean before ironing, adjust the temperature to the temperature suitable for the clothes according to the method of using the iron.
2. Put the cloth on the right place, the side with hot-melt adhesive is attached to the clothes (do not tear off the adhesive), preheat the iron, and paste the front from the cloth
Ironing for about 15 seconds, so as to fix the position of the cloth stick, you can also use the needle thread to fix the cloth stick position before ironing to prevent the cloth stick from shifting.
Then put the cloth stickers in the fixed position together with the clothes in reverse, iron from the reverse side for 30-60 seconds to ensure that the adhesive glue melts, and finally iron from the front
For 1-2 minutes, especially the corners, iron twice more hard to ensure that the surface is smooth and smooth, which is perfectly combined with the clothes.
3. In order to prevent burns, you can put a thin layer of cotton cloth on the cloth (must be cotton, but not a faded cloth). Check after finishing
Check the edges to see if they are hot, and burn the edges a few more times.
4. The temperature depends on the thickness of the decals. For thicker ones, the temperature must be higher and the scalding time longer. For extra thick cloth stickers, you can iron a few more times on the back.
5. Special attention: for cloth stickers with sequins or brighter surfaces (because the sequins are plastic products), be sure to put a layer of cloth and use a low temperature
Ironing (below 150 ℃), or directly using a steam iron. Or put a damp cloth on it. In order to avoid excessive temperature, the plastic sheet will melt.
6. The best way is to sew a few stitches on the edge of the cloth with the needle thread after ironing it, which is more firm and comfort
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000