Set 2 Linh Kiện Gia Dụng Cho Máy In 3d
₫ 139.000
Sản phẩm Set 2 Linh Kiện Gia Dụng Cho Máy In 3d đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
UNIQUE DESIGN: With unique snowflake heatsink design, it has a great cooling effect. The heat bed power ule can be used in both Lerdge motherboard and other 3D printer motherboards.
WELL MADE - The best connection is made of new materials and high quality stainless steel and the high grade aluminum blocks, which give longer product life.
APPLICATION: This high power ule is a general add-on heated bed power expansion ule for 3D printer. It can work with the Anet A8.
SAFETY - New terminal insulation cover to prevent leakage, to avoid electric shock, so use more safer.
Description:
This high power ule is a general add-on heated bed power expansion ule for 3D printer.
The appearance is small and generous, and the unique design of the snowflake radiator makes the cooling function more powerful, to soe the large hot bed power and current load problem.
This ule is based on power MOS and will allow PID control of the heated bed (DC-DC Relays usually do not allow this). Under the premise of normal cooling, it work stable under I(Max)=30A, the current must not exceed 30A while the process working.
Specification:
Dimensions: 70 x 45mm
Distance between holes: 62.8mm x 37.8mm
Supply/Operating Voltage: 12V-50V (12-24VDC recommended)
Max Current: 30A(Enhance heat dissipation) safe for prolonged times. ensure active cooling of the heatsink.
This ule is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)
Colour:Black
Material:Electronic component
Package Contents:
2 x 30A high power ule
2 x motherboard PWM 20CM signal control line
4 x 30cm power cord (2 red and black each)Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
WELL MADE - The best connection is made of new materials and high quality stainless steel and the high grade aluminum blocks, which give longer product life.
APPLICATION: This high power ule is a general add-on heated bed power expansion ule for 3D printer. It can work with the Anet A8.
SAFETY - New terminal insulation cover to prevent leakage, to avoid electric shock, so use more safer.
Description:
This high power ule is a general add-on heated bed power expansion ule for 3D printer.
The appearance is small and generous, and the unique design of the snowflake radiator makes the cooling function more powerful, to soe the large hot bed power and current load problem.
This ule is based on power MOS and will allow PID control of the heated bed (DC-DC Relays usually do not allow this). Under the premise of normal cooling, it work stable under I(Max)=30A, the current must not exceed 30A while the process working.
Specification:
Dimensions: 70 x 45mm
Distance between holes: 62.8mm x 37.8mm
Supply/Operating Voltage: 12V-50V (12-24VDC recommended)
Max Current: 30A(Enhance heat dissipation) safe for prolonged times. ensure active cooling of the heatsink.
This ule is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)
Colour:Black
Material:Electronic component
Package Contents:
2 x 30A high power ule
2 x motherboard PWM 20CM signal control line
4 x 30cm power cord (2 red and black each)Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1