Set 100 Đèn Led Smd0603 1608 Đa Năng Tiện Dụng

【Product Information】
Model: 0603 full range of colors
Size specifications: 1608
Power: 0.06 (W)
Color rendering index: 70
Luminous flux: 1 (lm)
Forward voltage: 2-3 (V)
Reverse voltage: 5 (V)
Electrostatic breakdown voltage (ESD): 2000 (V)
Rated current: 20M (A)
Chip size: 8 (mil)
Glue brand: Dow Corning
Wire material: alloy wire
Bracket material: copper
Beam angle: 120 (°)
Thermal resistance: ≤5 (°/W)
1000 hours regular aging: 100 (%)
6000 hours of conventional aging: 100 (%)
Whether to pass the LM-80 test: Yes
Related color temperature: red light, blue light, emerald green, general green/yellow-green, orange light, white, pink, purple, purple blue, warm white, cool white, yellow, ice blue

【Voltage】
2-2.2V: red yellow orange general green
2.8-3V: blue, white, warm white, ice blue, pink, purple

【 Precautions】
1. To prevent excessive current, resistance protection must be used, otherwise a slight voltage transfer will cause a large current change (burnout will occur).

2. Storage
2.1 Please do not open the product moisture-proof bag before the product is ready for use.
2.2 Before unopened, it should be stored below 30℃ and humidity below 60%. The maximum storage period is 1 year.
2.3 After opening the package, the LED must be stored under 30℃/40% humidity and must be used up within 7 days.
2.4 If the moisture-absorbing material (silicone) has disappeared or the storage time of the light-emitting diode has exceeded, the following conditions should be used for drying treatment. Drying treatment: 60±5℃ for 12 hours.

3. Welding conditions
3.1 Pb-free reflow solder temperature profile
3.2 Reflow soldering should not exceed twice.
3.3 Please do not put heavy pressure on the LED light when soldering.
3.4 Do not twist the circuit board when the temperature has not returned to normal temperature after soldering.

4. Manual soldering specification When hand soldering, the temperature of the soldering iron should not be higher than 350℃, and the soldering time for each foot should not exceed 3 se