SERVO DORNA 1.5 KW Bộ sản phẩm gồm: Motor, Driver, Cable, Jack Motor & Encoder, Cable CN1,Cn2

#Ac Servo Dorna 1.5 Kw
#Driver EPS2-HB150L123 + Motor 130DNA-15BB1 AMS/G

Bộ sản phẩm gồm: Motor, Driver, Cable, Jack Motor & Encoder, Cable CN1 (đầy đủ)
Sản phẩm đã được test xung, kiểm tra cẩn thận - Động cơ chạy êm, ổn định, tiếng ồn thấp - Điều khiển chính xác góc quay

Số điện thoại: 0936.830.718 Chung             
Zalo: 0936.830.718

#Động_cơ_AC_Servo được sử dụng rộng rãi trong máy công cụ, máy đóng gói, tự động hóa kho, robot công nghiệp, băng tải xe robot, máy cắt kim loại và máy tạo hình kim loại, chế biến gỗ, CNC, dệt may, cánh tay máy móc v.v. .

#muabancncvn  #BAN_AC_SERVO

GHI CHÚ: DO SHOPEE KHÔNG CÓ THƯƠNG HIỆU DORNA LÊN SHOP CHỌN THÀNH Dongcheng. ACE thông cảm nhé
Motor
Installation Place
Since the conditions of location affect a lot to the motor life, select a place which meets the conditions below.
1) Indoors, where the products are not subjected to rain or direct sun beam. The products are not waterproof.
2) Where the products are not subjected to corrosive atmospheres such as hydrogen sulfide, sulfurous acid,
chlorine, ammonia, chloric gas, sulfuric gas, acid, alkaline and salt and so on, and are free from splash of
inflammable gas, grinding oil, oil mist, iron powder or chips and etc.
3) Where the motor is free from grinding oil, oil mist, iron powder or chips.
4) Well-ventilated and humid and dust-free place, far apart from the heat source such as a furnace.
5) Easy-to-access place for inspection and cleaning.
6) Vibration-free place.
7) Avoid enclosed place. Motor may gets hot in those enclosure and shorten the motor life.
Environmental Conditions
How to Install
Oil, water
Cable Motor

*1 Ambient temperature to be measured at 5cm away from the motor.
*2 Permissible temperature for short duration such as transportation.
How to Install
You can mount the motor either horizontally or vertically as long as you observe the followings.
1) Horizontal mounting
• Mount the motor with cable outlet facing downward for water/oil countermeasure.
2) Vertical mounting
• Use the motor with oil seal (non-standard) when mounting the motor with gear reducer to prevent the
reducer oil/grease from entering to the motor.
3) For mounting dimensions, refer to P.326 to 340 "Dimensions".
Oil/Water Protection
1) Don't submerge the motor cable to water or oil.
2) Install the motor with the cable outlet facing downward.
3) Avoid a place wh