Mô Đun Đồng Hồ Rtc Ds1302 Cho Arduino Avr Arm Pic Smd Kitchenool01
24.905
₫ 14.445
Sản phẩm Mô Đun Đồng Hồ Rtc Ds1302 Cho Arduino Avr Arm Pic Smd Kitchenool01 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 24.905 xuống còn ₫ 14.445, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
Item Name: DS1302 Real Time Clock Module.
Color: Blue + Silver + Multi-Colored.
Material: PCB.
Weight: 0.28 oz (8 g).
Dimensions: 1.97 in x 0.98 in x 0.43 in (5*2.5*1.1cm)
Working temperature: 0°- 70°.
DS1302 work to maintain low power consumption data and clock information when power is less than 1mW.
DS1302 between the microcontroller can simply adopt the way synchronous serial communication port only used three lines: (1) RST Reset (2) I / O data lines (3) SCLK Serial Clock.
Simple 3-wire interface.
Serial I / O ports such a way that a minimum number of pins.
DS1302 real time clock module parameters are as follows:
PCB single panel, size: 44mm * 23mm * 1.6mm
With four positioning holes, diameter 3.1mm
Backup battery is genuine celestial CR2032, Voltage 3V, current 260mAh, non-rechargeable batteries.
Theoretical data retention time is more than 10 years!
DS1302 is made large 8-pin DIP chip, chip below IC socket for easy replacement and swap chips
Module operating voltage compatible 3.3V/5V, can be connected with 5V and 3.3V microcontroller
Note:
1. VCC and GND Do not reversed, it would burn the chip.
2. C51 MCU P0 port requires pull-up resistor, if your device does not have a pull-up resistor can be connected to other ports data lines.
Package included: 1 x DS1302 Module
1 x CR2032 battery kitchent
Item Name: DS1302 Real Time Clock Module.
Color: Blue + Silver + Multi-Colored.
Material: PCB.
Weight: 0.28 oz (8 g).
Dimensions: 1.97 in x 0.98 in x 0.43 in (5*2.5*1.1cm)
Working temperature: 0°- 70°.
DS1302 work to maintain low power consumption data and clock information when power is less than 1mW.
DS1302 between the microcontroller can simply adopt the way synchronous serial communication port only used three lines: (1) RST Reset (2) I / O data lines (3) SCLK Serial Clock.
Simple 3-wire interface.
Serial I / O ports such a way that a minimum number of pins.
DS1302 real time clock module parameters are as follows:
PCB single panel, size: 44mm * 23mm * 1.6mm
With four positioning holes, diameter 3.1mm
Backup battery is genuine celestial CR2032, Voltage 3V, current 260mAh, non-rechargeable batteries.
Theoretical data retention time is more than 10 years!
DS1302 is made large 8-pin DIP chip, chip below IC socket for easy replacement and swap chips
Module operating voltage compatible 3.3V/5V, can be connected with 5V and 3.3V microcontroller
Note:
1. VCC and GND Do not reversed, it would burn the chip.
2. C51 MCU P0 port requires pull-up resistor, if your device does not have a pull-up resistor can be connected to other ports data lines.
Package included: 1 x DS1302 Module
1 x CR2032 battery kitchent