Rơ Le Không Dây Điều Khiển Từ Xa Rf 433mhz 1 Kênh Dc12V Cgs
₫ 77.700
Sản phẩm Rơ Le Không Dây Điều Khiển Từ Xa Rf 433mhz 1 Kênh Dc12V Cgs đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
❄ Welcome To Chitengyesuper ❄
Features:
-Press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control the indicator flash 2 times and off .it mean you learn it successfully .
-It can learn 2272 2262 or 1527 chip with the different code wireless 433MHz remote control
-Remove/clean :press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully .
Specification:
-Input Voltage: DC10-14V
-Standby Current: <5MA
-RF Frequency: 433MHZ
-RF Working mode:Super heterodyne receiver
-Receiver Sensitivity: >90dBm
-Remote Control Distance: >100 meter(In open environment)
-Decoding Way: MCU Software decoding
-Can store the number of remote control:50
-Support remote control type: Fixed code, learning code
-Channel: 1CH
-Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
-Wiring Method:Fixed wiring terminal
-Working Voltage: DC12V
-Output Current: 10A
-Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
-Output:Normally open,Common,Normally closed
-Dimension:3.5cm*3cm*1.6cm
Working/output way:
-Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
-Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
-Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
-Delay: Press remote control 's one button,relay is working,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay
Package Included:
1 x 12V 1 Channel Wireless Relay Switch
Note:
The size is just for reference, there maybe exist a measurement error, please check carefully before you buy it.
Color may vary slightly due to different calibration of each mon
Features:
-Press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control the indicator flash 2 times and off .it mean you learn it successfully .
-It can learn 2272 2262 or 1527 chip with the different code wireless 433MHz remote control
-Remove/clean :press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully .
Specification:
-Input Voltage: DC10-14V
-Standby Current: <5MA
-RF Frequency: 433MHZ
-RF Working mode:Super heterodyne receiver
-Receiver Sensitivity: >90dBm
-Remote Control Distance: >100 meter(In open environment)
-Decoding Way: MCU Software decoding
-Can store the number of remote control:50
-Support remote control type: Fixed code, learning code
-Channel: 1CH
-Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
-Wiring Method:Fixed wiring terminal
-Working Voltage: DC12V
-Output Current: 10A
-Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
-Output:Normally open,Common,Normally closed
-Dimension:3.5cm*3cm*1.6cm
Working/output way:
-Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
-Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
-Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
-Delay: Press remote control 's one button,relay is working,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay
Package Included:
1 x 12V 1 Channel Wireless Relay Switch
Note:
The size is just for reference, there maybe exist a measurement error, please check carefully before you buy it.
Color may vary slightly due to different calibration of each mon