Rơ Le Không Dây 220v 1 Kênh 315 / 433mhz

?TRMY?220V 1 Channel Wireless Relay RF Remote Control Switch Receiver 315/433MHZSpecification:
-Input Voltage: AC85V-AC220V
-RF Frequency: 315/433MHZ
-RF Working mode:Super heterodyne receiver
-Receiver Sensitivity: -107dBm
-Remote Control Distance: >100 meter(In open environment)
-Decoding Way: MCU Software decoding
-Can store the number of remote control:32
-Support remote control type: Fixed code, learning code
-Channel: 1CH
-Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)
-Wiring Method:Fixed wiring terminal
-Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
-Dimension:5.4cm*3.1cm*1.4cm

Working/output way:
-Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
-Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
-Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.

Clear & Learn Code:
-Clear function - After pressing the "KEY" button 8 times, the LED will go off and release all the remote control data in the memory. When the LED flashes for 5 times, it indicates that the clear function is completed.
2, learning function - click the learning button "KEY", LED indicator light indicates that the microprocessor to enter the learning state of the code, press the matching wireless remote control button, LED light blinks 3 times then turn off means Code success.
-LED flashes to determine the selected function.
* Flashing 1 time - Jogging function
* Flashing 2 times - Self-locking function
* Blink 3 times - Interlock function

Notice:When using for the first time, make sure to clear the factory code and clear the remote control code.

Package included:
1 x 220V 1 Channel Wireless Relay S