Rơ Le 6 Kênh Công Tắc Điều Khiển Từ Xa Không Dây Công Suất Cao
513.000
₫ 360.000
Sản phẩm Rơ Le 6 Kênh Công Tắc Điều Khiển Từ Xa Không Dây Công Suất Cao đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 513.000 xuống còn ₫ 360.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
1. The receiver is powered by 12V, and the default is six independent relay signal output (that is, without voltage output), and the output terminals have normally open, normally closed, and common terminals (all without voltage). This switch can generally be applied to the following two occasions.
2. With 12V voltage output, this kind of equipment only needs to draw a positive line from the input end to the common end and then share the negative line of the input to directly control the 12V device.
3. Directly connect the normally open end and common end of the output end to other voltage circuits to control its on and off! (The recommended control voltage range is: 3V-250V, current range: 0.1A-10A resistive load)
4. The antenna of the receiver should be kept at 90 degrees perpendicular to the inductor as much as possible. The receiver should also be installed in an open place with little obstruction. At the same time, please try to stay away from inductive loads or strong electric and strong magnetic environments to ensure that the receiver has a good receiving effect. The antenna can be pulled straight down to increase the receiving sensitivity in the case of poor reception!
5. The receiver has the following 6 working es can be set, 6-way jog, 6-way self-locking, 6-way interlock, and jog self-locking interlock coexist
Product name: DC12V six-way remote control switch
Working voltage: DC12V
Working frequency; 433MHZ
Working e: Jog M4/self-locking T4/interlocking L4/jogging and self-locking coexist
Code pairing method; intelligent learning type
Working environment; -40~+80 degrees
Sensitive reception; greater than equal -105dBm
Output current; inductive less than equal 3.5A; resistive less than equal 6A
Product name; new 1000m six-button remote control
Working voltage; DC12V (12V23A)
Working frequency; 433MHZ
Chip el; 1527 or 2264 (different for different batches)
Encoding type; millions of codes or pad type into password
Oscillation resistance; 4.7 (default)
ulation method; ASK (stable and less interference)
Remote control distance; 1000 meters
size:120x49.8x18mm
Material:ABS
colour:white
Package Contents:
1 * Remote Control Switch
1 * Remote Control
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
2. With 12V voltage output, this kind of equipment only needs to draw a positive line from the input end to the common end and then share the negative line of the input to directly control the 12V device.
3. Directly connect the normally open end and common end of the output end to other voltage circuits to control its on and off! (The recommended control voltage range is: 3V-250V, current range: 0.1A-10A resistive load)
4. The antenna of the receiver should be kept at 90 degrees perpendicular to the inductor as much as possible. The receiver should also be installed in an open place with little obstruction. At the same time, please try to stay away from inductive loads or strong electric and strong magnetic environments to ensure that the receiver has a good receiving effect. The antenna can be pulled straight down to increase the receiving sensitivity in the case of poor reception!
5. The receiver has the following 6 working es can be set, 6-way jog, 6-way self-locking, 6-way interlock, and jog self-locking interlock coexist
Product name: DC12V six-way remote control switch
Working voltage: DC12V
Working frequency; 433MHZ
Working e: Jog M4/self-locking T4/interlocking L4/jogging and self-locking coexist
Code pairing method; intelligent learning type
Working environment; -40~+80 degrees
Sensitive reception; greater than equal -105dBm
Output current; inductive less than equal 3.5A; resistive less than equal 6A
Product name; new 1000m six-button remote control
Working voltage; DC12V (12V23A)
Working frequency; 433MHZ
Chip el; 1527 or 2264 (different for different batches)
Encoding type; millions of codes or pad type into password
Oscillation resistance; 4.7 (default)
ulation method; ASK (stable and less interference)
Remote control distance; 1000 meters
size:120x49.8x18mm
Material:ABS
colour:white
Package Contents:
1 * Remote Control Switch
1 * Remote Control
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1