【READY STOCK】Bộ chuyển đổi nối tiếp 6Pin USB 2.0 sang TTL UART CP2102 STC Thay thế mô-đun Ft 232
41.800
₫ 35.437
Sản phẩm 【READY STOCK】Bộ chuyển đổi nối tiếp 6Pin USB 2.0 sang TTL UART CP2102 STC Thay thế mô-đun Ft 232 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 41.800 xuống còn ₫ 35.437, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
PCB Dimensions: 26.5* 15.6mm
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
With self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader
With reset signal output, etc. directly to the Arduino board Promini download!
Supported operating systems:
Windows 98/Me/2000/7
MAC OS-9
MAC OS
X-Windows CE
Linux 2.40 or later
Feature:
Brand new and high quality
Included USB transceiver, without external circuit device
Includes a clock circuit and power-on reset circuit
Meet the USB2.0 specification requirements
SUSPEND pin supports USB suspend state
Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
Supported data format is 8 data bits, 1 stop bit and parity bits
Connotation 512 byte receive buffer and 512 byte transmit buffer
Supports hardware handshaking or X-ON/X-OFF
Package Included:
1 x 6Pin USB 2.0 to TTL UART Module Serial Converter CP2102 STC Replace Ft232 M
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
With self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader
With reset signal output, etc. directly to the Arduino board Promini download!
Supported operating systems:
Windows 98/Me/2000/7
MAC OS-9
MAC OS
X-Windows CE
Linux 2.40 or later
Feature:
Brand new and high quality
Included USB transceiver, without external circuit device
Includes a clock circuit and power-on reset circuit
Meet the USB2.0 specification requirements
SUSPEND pin supports USB suspend state
Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
Supported data format is 8 data bits, 1 stop bit and parity bits
Connotation 512 byte receive buffer and 512 byte transmit buffer
Supports hardware handshaking or X-ON/X-OFF
Package Included:
1 x 6Pin USB 2.0 to TTL UART Module Serial Converter CP2102 STC Replace Ft232 M