【READY STOCK】Bảng chuyển mạch điều khiển nối tiếp 5V 2CH 2 kênh RS232 DB9 SCM PC Rơle
180.950
₫ 129.215
Sản phẩm 【READY STOCK】Bảng chuyển mạch điều khiển nối tiếp 5V 2CH 2 kênh RS232 DB9 SCM PC Rơle đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 180.950 xuống còn ₫ 129.215, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Power requirements: DC4.5V - 5V, with inside positive, outside negative; or DC9-12V, First pin connectes to VDD, second pin connected to GND.
Each channel is set from 1 to 255 seconds delay independently
Simple to operate, most serial instruction are single byte instruction
Onboard 2 relay (which can be accessed extended 2-way relay module)
With absorption diode circuit
Each relay has a LED indicator, LCD lights relay absorption
With 1-channel power indicator
With capacitor filter circuit, with improved stability
Support for 5V or 9-12V input voltage
Interface:
J5: using 5V power supply input
J6: using 9 ~ 12V power input, No.1 pin connects VCC, No.2 connects GND
J3 ~ J4 blue terminal: connect user load, it can be used 220V AC, or less than 30V DC device, the device current can not exceed the relay standard load .
Each relay has a normally open contact, a normally closed contact and a common contact. When relay absorps, the common contact and normally open contact conduct; when the relay releases, public contact and normally closed contact conduct.
Package:
1 x 5V 2 Channel RS232 Serial Control Relay Switch Board SCM PC R
Each channel is set from 1 to 255 seconds delay independently
Simple to operate, most serial instruction are single byte instruction
Onboard 2 relay (which can be accessed extended 2-way relay module)
With absorption diode circuit
Each relay has a LED indicator, LCD lights relay absorption
With 1-channel power indicator
With capacitor filter circuit, with improved stability
Support for 5V or 9-12V input voltage
Interface:
J5: using 5V power supply input
J6: using 9 ~ 12V power input, No.1 pin connects VCC, No.2 connects GND
J3 ~ J4 blue terminal: connect user load, it can be used 220V AC, or less than 30V DC device, the device current can not exceed the relay standard load .
Each relay has a normally open contact, a normally closed contact and a common contact. When relay absorps, the common contact and normally open contact conduct; when the relay releases, public contact and normally closed contact conduct.
Package:
1 x 5V 2 Channel RS232 Serial Control Relay Switch Board SCM PC R