RC Động Cơ Không Chổi Than Esc Xxd Hw30a 30a Cho Máy Bay Điều Khiển Từ Xa
₫ 249.300
Sản phẩm RC Động Cơ Không Chổi Than Esc Xxd Hw30a 30a Cho Máy Bay Điều Khiển Từ Xa đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
Product Category:brushless 30A ESC
Packing: electrostatic bag;
Continuous current 30A, instant 35A, 40A for 10 seconds.
Dimensions/weight:
32 X 24 X 7 (mm) 13 grams (without wire) 20 grams (with wire)
voltage range:
4V-16V
Number of batteries:
4-12NIMH
2-3LIPO (4LIPO does not allow BEC output)
BEC output:
Continuous 2A, (instantaneous 3A)
2LIPO 4-5 micro steering gear
3LIPO 3-4 micro steering gear
Protective function:
Automatically select 2-3LIPO, the protection voltage is 6V/9V respectively;
Automatically select NIMH, the protection voltage of each section is 0.8V;
Safe start, the throttle position is wrong to prohibit start;
Temperature protection, shutdown at 110 degrees surface temperature;
Out of control protection, stop after 1 second without signal.
The upper limit of rotation speed is up to 300,000 rpm in 2 poles, 50000 rpm in 12 poles, and 42000 rpm in 14 poles.
8KHz PWM control, using speed control curve.
Automatic throttle adaption, suitable for more remote control equipment.
Using BEC, the MCU separates the power supply and the work is more stable.
Setting method:
-Turn on the transmitter and push the throttle to (FUTABA series transmitters need to select the throttle channel to use REV).
-Connect the receiver and motor.
-Connect the ESC power supply, if the transmitter is normal, there will be the following sounds: (If this sound is a long "beep" sound after the end, there will be no more sound, then check the reverse setting of the throttle channel of the transmitter.)
Packing list:
brushless ESC*1
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Product Category:brushless 30A ESC
Packing: electrostatic bag;
Continuous current 30A, instant 35A, 40A for 10 seconds.
Dimensions/weight:
32 X 24 X 7 (mm) 13 grams (without wire) 20 grams (with wire)
voltage range:
4V-16V
Number of batteries:
4-12NIMH
2-3LIPO (4LIPO does not allow BEC output)
BEC output:
Continuous 2A, (instantaneous 3A)
2LIPO 4-5 micro steering gear
3LIPO 3-4 micro steering gear
Protective function:
Automatically select 2-3LIPO, the protection voltage is 6V/9V respectively;
Automatically select NIMH, the protection voltage of each section is 0.8V;
Safe start, the throttle position is wrong to prohibit start;
Temperature protection, shutdown at 110 degrees surface temperature;
Out of control protection, stop after 1 second without signal.
The upper limit of rotation speed is up to 300,000 rpm in 2 poles, 50000 rpm in 12 poles, and 42000 rpm in 14 poles.
8KHz PWM control, using speed control curve.
Automatic throttle adaption, suitable for more remote control equipment.
Using BEC, the MCU separates the power supply and the work is more stable.
Setting method:
-Turn on the transmitter and push the throttle to (FUTABA series transmitters need to select the throttle channel to use REV).
-Connect the receiver and motor.
-Connect the ESC power supply, if the transmitter is normal, there will be the following sounds: (If this sound is a long "beep" sound after the end, there will be no more sound, then check the reverse setting of the throttle channel of the transmitter.)
Packing list:
brushless ESC*1
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
HOT