RC Bo Mạch Phân Phối Nguồn Pdb Xt60 Với Bec 5v 2a 12v 0.5a Cho Máy Bay Điều Khiển Từ Xa
₫ 78.000
Sản phẩm RC Bo Mạch Phân Phối Nguồn Pdb Xt60 Với Bec 5v 2a 12v 0.5a Cho Máy Bay Điều Khiển Từ Xa đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
[Ready Stocks]PDB XT60 Power Distribution Board with W/ BEC 5V 2A 12V 0.5A for RC Drone
Features:
1.2oz copper, 4-layers &1.6mm PCB.
2.Built-in XT60 Socket.
3.Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output .
4.LED indicators & Short circuit tolerant.
5.Input voltage range (3S-4S LiPo operation): 9 - 18V DC.
6.6 ESC outputs & 1 pair VCC/GND pads.
Descriptions:
1.The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB.
2.It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.
3.It offers a XT60 socket to connect the LiPo pack conveniently.
Specifications:
ESC outputs:
Continuous current: 25A*4 or 15A*6
Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
Designed for Video TX or FPV camera with linear regulator.
The battery should be 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute)
BEC 12V @ 3S LiPo
Output voltage= 3S LiPo voltage -1V
Dimensions: 36 x 50 x 4 mm (without XT60)
Mounting: 30.5 x 30.5mm, Φ3mm
Weight: 7g
Package informations:
Package size:7x5x1cm
Package weight:12g
Plastic bag package
Package Includes:
1x Matek Systems PDB-XT60
Note:
There might be some deviation due to manual measure
Features:
1.2oz copper, 4-layers &1.6mm PCB.
2.Built-in XT60 Socket.
3.Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output .
4.LED indicators & Short circuit tolerant.
5.Input voltage range (3S-4S LiPo operation): 9 - 18V DC.
6.6 ESC outputs & 1 pair VCC/GND pads.
Descriptions:
1.The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB.
2.It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.
3.It offers a XT60 socket to connect the LiPo pack conveniently.
Specifications:
ESC outputs:
Continuous current: 25A*4 or 15A*6
Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
Designed for Video TX or FPV camera with linear regulator.
The battery should be 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute)
BEC 12V @ 3S LiPo
Output voltage= 3S LiPo voltage -1V
Dimensions: 36 x 50 x 4 mm (without XT60)
Mounting: 30.5 x 30.5mm, Φ3mm
Weight: 7g
Package informations:
Package size:7x5x1cm
Package weight:12g
Plastic bag package
Package Includes:
1x Matek Systems PDB-XT60
Note:
There might be some deviation due to manual measure