Quạt Thông Gió Đôi F1-Z Tuabin Nhiên Liệu Cho Xe Hơi

Product introduction
Specification: 7.5cm long, 6.0cm in diameter and 6.4 CM in diameter.
The inside diameter of the intake pipe is greater than 6.4 cm, which can be inserted directly into the tube, less than 6.4cm, and the tube should be changed.
Installed on the engine air intake hose, when the engine start properly in accordance with the use of natural engine air intake of inertia force, the high-speed rotating wheel disc drive space, at the same time of rotation drive a lot of fresh air into the engine inside the unceasingly, at the same time also will enter the air the way according to the forced vortex, can make the high-speed rotating air mixed with the nozzle jet fuel, at the same time can also be made to enhance the density of air inside the air intake hose, mixture can greatly increase efficiency, the combustion would produce more power, and rise to improve the effect of power.
Function:
1.It greatly improves the torque of the bottom speed of the car and improves the inlet flow.
2.It's easier to burn the gas in the cabin, and the throttle feels lighter and more flexible.
3.It can also play the role of fuel economy, the oil saving rate is between 5% and 15%, regardless of the model, the installation is convenient.
Installation instructions
Bellows installed in the car with the inlet hose between the throttle, when installation should look at the size of the original car air intake hose diameter and configure the momentum wheel itself with the thickness of the rubber collar, dynamic wheel with three rubber collars with different thickness, when installation according to the size of the air intake hose diameter appropriate choice.
Bellows installed in the car with the inlet hose between the throttle, when installation should look at the size of the original car air intake hose diameter and configure the momentum wheel itself with the thickness of the rubber collar, dynamic wheel with three rubber collars with different thickness, when installation according to the size of the air intake hose diameter appropriate choice.

Specification:
Color: Blue
Dimensions: 2.5inch x 2.875inch

Description:
Universal fit for most cars, truck and SUVs with intake hose size 2.5" ~ 2.875".
Made of high quality light weight aluminum.
Maximum speed movement 55,000 RPM.
Increase horsepower and better on gas/fuel millage.
Easy install.

Installation:
1.Loosen the clamps around the tube and remove air cleaner.
2.Put the intake fan into the air inlet hose.
3.If the intake fan is smaller than the air inlet hose, use the rubber holder attached to increase it's diameter so it can fit in the tube.
4.Reinstall the tube and tighten up the clamps.

Package includes:
1 x Turbo Air Intake Saver Fan( Double Propeller )
3 x Non-Slip Rubber H