PK HC-05 6 Pin Wireless RF Transceiver Module Serial For Arduino
₫ 74.000
Sản phẩm PK HC-05 6 Pin Wireless RF Transceiver Module Serial For Arduino đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
PK HC-05 6 Pin Wireless RF Transceiver Module Serial For Arduino
Features:
With VCC, GND, TXD, RXD, KEY foot for the Bluetooth.
Led indicate Bluetooth connection status, fast flash indicates unpaired, slow flash indicates AT mode, double flash indicates machine connected.
Backplane settings LDO input voltage of 3.6-6V unpaired current is about 30mA, paired 10mA, input voltage prohibit more than 7V absolute prohibition of reverse power!
Interface level 3.3V, can be directly connected the various SCM (51, AVR, PIC, ARM, MSP430, etc.), the 5V MCU also can be connected directly, without MAX232 can not go through the MAX232!
Open to effective distance of 10 meters, over 10 meters is also possible, but not of this the quality of the connection of the distance do to ensure.
The pair later when full-duplex serial use, do not need to know anything about the Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format, which is the most commonly used communication format does not support other formats.
Descriptions:
Support to establish a Bluetooth connection through AT commands set the baud rate, passkey, set parameters are saved after.
Specifications:
Input voltage: 3.6-6V
Working current: matching for 30 mA, matching the communication for 10 mA
Output Power Class: Class 2
Size: 43mm x 15mm
Color: Blue
Package Includes:
1 x HC-05 Wireless Bluetooth RF Transceiver Module
Features:
With VCC, GND, TXD, RXD, KEY foot for the Bluetooth.
Led indicate Bluetooth connection status, fast flash indicates unpaired, slow flash indicates AT mode, double flash indicates machine connected.
Backplane settings LDO input voltage of 3.6-6V unpaired current is about 30mA, paired 10mA, input voltage prohibit more than 7V absolute prohibition of reverse power!
Interface level 3.3V, can be directly connected the various SCM (51, AVR, PIC, ARM, MSP430, etc.), the 5V MCU also can be connected directly, without MAX232 can not go through the MAX232!
Open to effective distance of 10 meters, over 10 meters is also possible, but not of this the quality of the connection of the distance do to ensure.
The pair later when full-duplex serial use, do not need to know anything about the Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format, which is the most commonly used communication format does not support other formats.
Descriptions:
Support to establish a Bluetooth connection through AT commands set the baud rate, passkey, set parameters are saved after.
Specifications:
Input voltage: 3.6-6V
Working current: matching for 30 mA, matching the communication for 10 mA
Output Power Class: Class 2
Size: 43mm x 15mm
Color: Blue
Package Includes:
1 x HC-05 Wireless Bluetooth RF Transceiver Module
Sản Phẩm Liên Quan
HOT
Jack bắp chuối đực- cái 4mm
₫ 1.500
HOT
Gân loa 16 - 12 - 10
₫ 4.000
HOT
Tai nghe nhét tai có ảnh thật
₫ 17.000