PK Car Engine Push Start RFID 2.4GH Lock Ignition Starter Remote Control Kit 12V
₫ 401.000
Sản phẩm PK Car Engine Push Start RFID 2.4GH Lock Ignition Starter Remote Control Kit 12V đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
PK Car Engine Push Start RFID 2.4GH Lock Ignition Starter Remote Control Kit 12V
Features:
How it works: This product made by highly encrypted rolling code,
the distance between the unit and the remote is about 5 meters.
This product is suitable for 12V vehicle.
The voice notice: If the unit receives a remote signal, buzzer
sound "B" proved to be able to start the engine normally.
The remote control battery detection: When the battery voltage is
lower than 2.3V, you start the engine, the buzzerwill B-B-B-B sound
for 10 seconds
Emergency switch function: If the remote control is lost or
damaged, put the emergency switch close to the right (near the side of
the wire outlet), you can start the car normally.
Description:
Auto-sensing, no need to operate: Press any button on the remote
control to turn on the auto-sensingmode, the remote ontrol
transmits signals every 3 seconds. As long as the remote control can
start the car as usual,No other action required. If not used for a
long time, press and hold any key on the remote control for 3 seconds,
turn off the remote control to save battery life after LED flashing
twice. General automatic mode needs to be changed battery about a year
. take a remote control when driving, not recommended with car key,
you can put into pocket or luggage bag.
Specification:
unit Working voltage: DC 12 +3V
Static current: :engine on:5mA,engin off:0mA
Remote Working voltage:3V;
Average static current:5uA
RFID distance:5M ,
Working frequency:433.92MHz
Hopping coded
NOTICE:
When not using the system ,turn the remote off for extends battery
life ,This product is not waterproof design.Antenna should not be
touched by metal.
About installation:
The product need installed by the Profesionales with Car electrician
certificated
For 12V DC car
Package Include:
Package list:(1 set)
1 x Unit with wire
2 x Sensor Remomte
1 x User manual in En
Features:
How it works: This product made by highly encrypted rolling code,
the distance between the unit and the remote is about 5 meters.
This product is suitable for 12V vehicle.
The voice notice: If the unit receives a remote signal, buzzer
sound "B" proved to be able to start the engine normally.
The remote control battery detection: When the battery voltage is
lower than 2.3V, you start the engine, the buzzerwill B-B-B-B sound
for 10 seconds
Emergency switch function: If the remote control is lost or
damaged, put the emergency switch close to the right (near the side of
the wire outlet), you can start the car normally.
Description:
Auto-sensing, no need to operate: Press any button on the remote
control to turn on the auto-sensingmode, the remote ontrol
transmits signals every 3 seconds. As long as the remote control can
start the car as usual,No other action required. If not used for a
long time, press and hold any key on the remote control for 3 seconds,
turn off the remote control to save battery life after LED flashing
twice. General automatic mode needs to be changed battery about a year
. take a remote control when driving, not recommended with car key,
you can put into pocket or luggage bag.
Specification:
unit Working voltage: DC 12 +3V
Static current: :engine on:5mA,engin off:0mA
Remote Working voltage:3V;
Average static current:5uA
RFID distance:5M ,
Working frequency:433.92MHz
Hopping coded
NOTICE:
When not using the system ,turn the remote off for extends battery
life ,This product is not waterproof design.Antenna should not be
touched by metal.
About installation:
The product need installed by the Profesionales with Car electrician
certificated
For 12V DC car
Package Include:
Package list:(1 set)
1 x Unit with wire
2 x Sensor Remomte
1 x User manual in En