Phụ kiện đĩa mài chuyên dụng trong chế tác đồ gỗ dành cho máy mài góc
103.000
₫ 67.000
Sản phẩm Phụ kiện đĩa mài chuyên dụng trong chế tác đồ gỗ dành cho máy mài góc đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 103.000 xuống còn ₫ 67.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
------------Welcome to ✿Great1688✿ store-------------
Decription:
Features:
1. Suitable for rapid removal and shaping, especially for convex and concave areas.
2. Provides rapid material removal, saving your time and effort, suitable for curved work.
3. Tungsten carbide coatings consist of hundreds of extremely sharps teeth
that rapidly remove stock and outlasts hundreds of sandpaper pads.
4. Tungsten carbide teeth give you a outstanding wear-life.
5. Should only be used on non-metals or non-metal materials, suitable for wood and other materials.
6. Fit for angle grinder and it is easy to operate it.
7. 5/8 inch bore are intended to mount on a standard electric angle grinder.
Specifications:
Type: 3.3 inch diameter 5/8 inch bore shaping disc, 4 inch diameter 5/8 inch bore shaping disc (optional)
Teeth Material: Tungsten Carbide
3.3 inch diameter 5/8 inch bore shaping disc
Diameter: 84mm / 3.3 in
4 inch diameter 5/8 inch bore shaping disc
Diameter: 100mm / 4 in
Notice:
Actual color may be slightly different from the image due to different monitor and light effect
Please allow 1-3cm deviation due to manual measurement
Included:
1x Angle Grinding
Decription:
Features:
1. Suitable for rapid removal and shaping, especially for convex and concave areas.
2. Provides rapid material removal, saving your time and effort, suitable for curved work.
3. Tungsten carbide coatings consist of hundreds of extremely sharps teeth
that rapidly remove stock and outlasts hundreds of sandpaper pads.
4. Tungsten carbide teeth give you a outstanding wear-life.
5. Should only be used on non-metals or non-metal materials, suitable for wood and other materials.
6. Fit for angle grinder and it is easy to operate it.
7. 5/8 inch bore are intended to mount on a standard electric angle grinder.
Specifications:
Type: 3.3 inch diameter 5/8 inch bore shaping disc, 4 inch diameter 5/8 inch bore shaping disc (optional)
Teeth Material: Tungsten Carbide
3.3 inch diameter 5/8 inch bore shaping disc
Diameter: 84mm / 3.3 in
4 inch diameter 5/8 inch bore shaping disc
Diameter: 100mm / 4 in
Notice:
Actual color may be slightly different from the image due to different monitor and light effect
Please allow 1-3cm deviation due to manual measurement
Included:
1x Angle Grinding
Sản Phẩm Liên Quan
HOT
HOT
HOT
HOT