Ốp Điện Thoại Tpu Mỏng Chống Trầy 2 Mặt Bảo Vệ Màn Hình Cho Iphone 11 Pro (5.8 ")
₫ 112.900
Sản phẩm Ốp Điện Thoại Tpu Mỏng Chống Trầy 2 Mặt Bảo Vệ Màn Hình Cho Iphone 11 Pro (5.8 ") đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
For the iphone 11 pro (5.8 inch screen size).
It doesn 't match the ordinary iphone 11 or the iphone 11 pro max.
Anti-scratch tpu / jelly / plastic material is flexible, not tempered glass so it can be installled following the shape of a mobile phone.
Can buy the front side or the back side.
It 's a little hard to installl, because it' s flexible and the surface of the curved cell phone, unlike tempered glass. There is no warranty for installlation that fails such as dust or bubble ya gan. Please don 't give me a bad rating if the installlation isn' t perfect. Thanks
1. Before starting the installlation, test put the antigrats on the phone to know where the exact position is.
2. Clear the screen.
3. Open the no. 1 antigrash shield, the way everyone 's pairs are different 2, some people open little by little while installling, others use sticky tape on the one side of the antigrash to the cell phone.
4. Once it 's done, if there' s a bubble (which is important there 's no sticky dust in it), it can use an atm card wrapped in thin tissue, press and push the bubble aside, no need to open the antigrash.
5. Once installled perfectly (no more bubbles), then open plastic number 2. Be careful when you open plastic number 2, sometimes plastic 2 is very sticky to the antigrats, so make sure the antigrats don 't get picked up. Open the corner for sure. The antigrats are safe.
6. Once plastic 2 is opened, don 't use the atm card again to release air bubbles, because the antigrats will be scratched.
The plastic color is not always white. But the antigrats remain transpar
It doesn 't match the ordinary iphone 11 or the iphone 11 pro max.
Anti-scratch tpu / jelly / plastic material is flexible, not tempered glass so it can be installled following the shape of a mobile phone.
Can buy the front side or the back side.
It 's a little hard to installl, because it' s flexible and the surface of the curved cell phone, unlike tempered glass. There is no warranty for installlation that fails such as dust or bubble ya gan. Please don 't give me a bad rating if the installlation isn' t perfect. Thanks
1. Before starting the installlation, test put the antigrats on the phone to know where the exact position is.
2. Clear the screen.
3. Open the no. 1 antigrash shield, the way everyone 's pairs are different 2, some people open little by little while installling, others use sticky tape on the one side of the antigrash to the cell phone.
4. Once it 's done, if there' s a bubble (which is important there 's no sticky dust in it), it can use an atm card wrapped in thin tissue, press and push the bubble aside, no need to open the antigrash.
5. Once installled perfectly (no more bubbles), then open plastic number 2. Be careful when you open plastic number 2, sometimes plastic 2 is very sticky to the antigrats, so make sure the antigrats don 't get picked up. Open the corner for sure. The antigrats are safe.
6. Once plastic 2 is opened, don 't use the atm card again to release air bubbles, because the antigrats will be scratched.
The plastic color is not always white. But the antigrats remain transpar
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000