Ốp Điện Thoại Màu Đỏ Đen Trơn Nhãn Dán Cho Iphone 6s 6s Plus 7 7 Plus 8 8 Plus
139.000
₫ 120.200
Sản phẩm Ốp Điện Thoại Màu Đỏ Đen Trơn Nhãn Dán Cho Iphone 6s 6s Plus 7 7 Plus 8 8 Plus đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 139.000 xuống còn ₫ 120.200, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
For those of you who want to use an iphone without a case but fear beret?
Here 's the solution, the back cover sticker for the iphone. It 's useful to prevent berets on the back of the iphone.
Available for:
- iphone 6 / s
- iphone 6 + / s
- iphone 7.
- iphone 7 plus > > silver empty
- iphone 8
- iphone 8 plus > > silver empty
- iphone x!!)
Sticker color choice:
1. Black solid.
2. Red solid.
3. Blue solid.
4. Gold solid.
5. Silver solid > > 7 plus / 8 plus empty
6. Green solid > > iphone x no
Description:
1. Useful back cover case for iphone
2. Very thin
3. Didn 't leave a mark when it was removed
4. There are already patterns and cutting dies so there is no need to be cut2 anymore
5. Stickers made of elastic material are not easy to tear.
6. Easy installlation / no bubbling
7. Cell phone sticker protective cover (upper right bottom left)
8. Each sticker has a cutting edge on the apple logo (following apple 's logo, not a round one)
9. Every sticker has no california design (plain)
Installlation guide:
1. Clean the back of the iphone that wants to stick to the sticker
2. Before removing the sticker from the paper, remove / remove section 2 that does not want to be closed (e.g. Speaker hole, volume hole, jack hole, etc.)
3. Use a little soap water mixture, and then spray it onto the paste (the point is to be easily adjusted / not directly attached to the body of the iphone)
4. To avoid tilt results, it is best to pair it with the camera hole first and then follow the bottom.
5. After all the paste paste should be dried using a hairdyer to make the sticker more adhesive / non-opot2.
Attention!
1. Did not receive compensation for mis installlation
2. Do not accept the installlation
3. We only sell stickers, no installlation.
4. We guarantee that if there is a bend on the sticker (at the time of delivery), it can still be installled without a t
Here 's the solution, the back cover sticker for the iphone. It 's useful to prevent berets on the back of the iphone.
Available for:
- iphone 6 / s
- iphone 6 + / s
- iphone 7.
- iphone 7 plus > > silver empty
- iphone 8
- iphone 8 plus > > silver empty
- iphone x!!)
Sticker color choice:
1. Black solid.
2. Red solid.
3. Blue solid.
4. Gold solid.
5. Silver solid > > 7 plus / 8 plus empty
6. Green solid > > iphone x no
Description:
1. Useful back cover case for iphone
2. Very thin
3. Didn 't leave a mark when it was removed
4. There are already patterns and cutting dies so there is no need to be cut2 anymore
5. Stickers made of elastic material are not easy to tear.
6. Easy installlation / no bubbling
7. Cell phone sticker protective cover (upper right bottom left)
8. Each sticker has a cutting edge on the apple logo (following apple 's logo, not a round one)
9. Every sticker has no california design (plain)
Installlation guide:
1. Clean the back of the iphone that wants to stick to the sticker
2. Before removing the sticker from the paper, remove / remove section 2 that does not want to be closed (e.g. Speaker hole, volume hole, jack hole, etc.)
3. Use a little soap water mixture, and then spray it onto the paste (the point is to be easily adjusted / not directly attached to the body of the iphone)
4. To avoid tilt results, it is best to pair it with the camera hole first and then follow the bottom.
5. After all the paste paste should be dried using a hairdyer to make the sticker more adhesive / non-opot2.
Attention!
1. Did not receive compensation for mis installlation
2. Do not accept the installlation
3. We only sell stickers, no installlation.
4. We guarantee that if there is a bend on the sticker (at the time of delivery), it can still be installled without a t