Ốp điện thoại hydrogel chống ánh sáng xanh trước sau cho HTC U11 ULTRA U PLAY U11 PLUS ALL

Can you just REQUES for cell phone TYPE?


Still remember the same one called Tempered Glass?
The ancient screen protector is the window on the screen makes a thin phone feel like a thick old phone, especially when it 's front and back. It 's hard to break a little bit, sometimes it' s cracked, it 's hard to break. The sensitivity of the screen doesn 't have to say the same thing as the old touch screen phone. It 's not like it' s making the screen hard to read on the outside.

Surely toppers has forgotten the ancient technology because now there are Hydro-Gel Screen protectors whose excesses are sbb:

- flexibility with a curved screen.
- thin berets will be gone in less than 48 hours
- easy to installl, if there 's a bubble it' ll disappear itself in less than 24 hours.
- thin is only 0.2mm. The screen stays sensitive.
- the surface of the screen is a little soft, touch / swipe is better.

Installlation tips: Phase 1
- clean the screen with a lap, help with a little alcohol if the screen is so dirty or greasy.
- open up a bit of protective cover that says 1 BACK at one end first, then adjust to the tip of the phone screen.
- stick it at the end of ybs, then while the shield is opened little by little, stick it towards the other end with a card.
- once it 's installled all take off the outer layer that says 2 fronts

Stage 2 installlation tips

-. Clean the screen using the wet tissue provided.
-. Clean the Dust on the screen with Dust Absorber Sticker
If it feels clean enough and no dust is attached, proceed to the next stage.
-. Take the VIVAN Hydrogel, and open the white lining behind,
-. The precision of the Hydrogel on the screen, once squeezed already precision, goes to the next stage.
-. Open 1 side top / bottom (1 side only first), lift the top / bottom side until the hydrogel cleavage layer is visible.
-. Push and press the side that opened with the Scrup provided, and then do it on the other side.
- push and press it slowly all over the hydrogel that 's attached to the screen, if it' s enough, go on to the next stage.
-. Open the top layer of Hydrogel slowly.
-. Clean it with the soft cloth provided.
-. Done

For easier ways to see on yo