Ống tiêm thuốc mỡ
₫ 8.000
Sản phẩm Ống tiêm thuốc mỡ đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
GD900 thermal paste selects much more tiny particle diameter metal oxide as the main raw materials, used for filling the gap between the heat source and heat sink device. Its outstanding performance on the CPU GPU LED will meet your high standard demand for cooling system.
GD900 Thermal Paste
Color: Gray
Specific Gravity: 2.3 G/Cc
Thermal Conductivity: 4.8 W/M-K
Operating Temperature: -58~392 Degrees Fahrenheit
Product features: Accord with RoHS and REACH environmental protection requirements. High thermal conductivity, high insulation, high temperature resistant, low oil separation, non-corrosive.
Working principle: Filling the gap between heating element and the cooling device; Increasing the contact area so as to achieve the soundest thermal conductivity effect.
Method of use: It's normal phenomena if there is little silicone oil floating above. Please stir well before use. Keep the coated surface clean and apply directly with tools (such as scraper, finger cot, etc).
Warm notice: Keep children away from it. If it is swallowed or inadvertently come into eyes, ear, nose, mouth,please flush with clean water or send to hospital when necessary.
Storage: Preservation at normal temperature. Please cover it after used, avoiding impurities such as dust, that have a bad effect on thermal conductivity.
Smearing Steps
1. Please clean the surfaces of heat source (CPU) and dissipate heat device (heat sink) with dry tissues.
2. Using scraper or other tools to smear the thermal paste onto the CPU, and it’s no need to smear on heat sink.
3. The thermal paste should be smeared evenly on the whole CPU surface. It can neither too thin, the printed words on it should be covered. Nor too thick, the thickness like A4 paper will be better. Please refer to the following pict
GD900 Thermal Paste
Color: Gray
Specific Gravity: 2.3 G/Cc
Thermal Conductivity: 4.8 W/M-K
Operating Temperature: -58~392 Degrees Fahrenheit
Product features: Accord with RoHS and REACH environmental protection requirements. High thermal conductivity, high insulation, high temperature resistant, low oil separation, non-corrosive.
Working principle: Filling the gap between heating element and the cooling device; Increasing the contact area so as to achieve the soundest thermal conductivity effect.
Method of use: It's normal phenomena if there is little silicone oil floating above. Please stir well before use. Keep the coated surface clean and apply directly with tools (such as scraper, finger cot, etc).
Warm notice: Keep children away from it. If it is swallowed or inadvertently come into eyes, ear, nose, mouth,please flush with clean water or send to hospital when necessary.
Storage: Preservation at normal temperature. Please cover it after used, avoiding impurities such as dust, that have a bad effect on thermal conductivity.
Smearing Steps
1. Please clean the surfaces of heat source (CPU) and dissipate heat device (heat sink) with dry tissues.
2. Using scraper or other tools to smear the thermal paste onto the CPU, and it’s no need to smear on heat sink.
3. The thermal paste should be smeared evenly on the whole CPU surface. It can neither too thin, the printed words on it should be covered. Nor too thick, the thickness like A4 paper will be better. Please refer to the following pict
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000