Ổ Cắm Thông Minh Điều Khiển Từ Xa Bằng Ứng Dụng Điện Thoại

Package Included:
1*smart socket
1*Instruction
Specifications:
Input voltage: AC100～240V
Input frequency: 50/60Hz
Maximum load current: 10A
WIFI standard: WIFI 802.11 b/g/n
WIFI frequency: 2.4GHz～2.5Ghz (2400M～2483.5M)
Security mechanism: WAP/WAP2
Encryption type: WEP/TKIP/AES
Working power consumption <1.3W
Standby power consumption <0.7W
Indicator: blue LED
PER<8%. RX sensitivity, 802.11b CCK Mode 11M: -91dBm
PER10%.RX sensitivity, 802.11g OFDM Mode 54M: -75dBm
PER10%.RX sensitivity, 802.11n OFDM Mode MCS7: -72dBm
Description:
100% Brand New and High Quality!
APP:tuya/smart life
1. WiFi remote control and device state device icon. Device state always simultaneous display on APP
2. Share Control：Share the devices with other tuya accounts.
3. Timing ： Support max 8 enabled single/repeat/countdown timing schedules each device.
4. Set default power on status default device status: ON or OFF when the device is power on.
5. Scene/Smart Scene：You can set up scenes or smart trigger on/off the device.
Voice Control: Works with for Alexa and for Google assistant for voice control. Power your devices without lifting a finger.
Fantastic Design: Easy to install, no hub and subscription required; Super mini body and compact design, does not take up much space.
Steps
A. One-key configuration
1. Please connect the mini socket to the power supply and wait for the indicator light to flash quickly, or press and hold the switch for 5 seconds until the indicator light flashes quickly (2 flashes per second).
2. Connect the phone to wifi and confirm success.
3. Open the APP, click the add icon in the upper right corner of the device list, and select "Socket" to enter the configuration device interface.
4. Click "Please confirm that the indicator light is flashing fast", enter the password of the WIFI currently connected to the mobile phone, and click "Confirm".
5. Wait for the configuration. After the configuration is successful, click "Finish" to jump to the socket function interface.
B. AP configuration
AP configuration is a shop assistant configuration method. If one-key configuration fails, you can use AP configuration. Methods as below:
1. Long press the switch button for 5 seconds, the indicator light will enter a slow flashing state (on for 2 seconds, off for 2 seconds).
2. Open the APP, click the add icon in the upper right corner of the device list, select "Socket" to enter the configuration device interface, click on the upper right corner
"Compatibility Mode" enters the AP configuration interface.
3. Click "Please confirm that the indicator light is flashing slowly", enter the password of the WIFI currently connected to the phone, and click "Confirm".
4. Click "Go to connect", it will jump to the WIFI list interface, select SmartLife-XXXX and click "Connect".
5. Click the return button on the mobile phone and wait for the configuration. After the configuration is successful, click "Finish" to jump to the function interface of the so