CHANNEL Điều Khiển Từ Xa 433mhz Tiện Dụng Chất Lượng Cao

Package Included:
remote control *1
Specifications:
Group switching:
Press the second button and the third button of the copy remote control at the same time for more than 1.5S to switch the number of remote control groups.
copy:
One-click copy:
(1) Press and hold the button that needs to be copied on the copy remote control, the LED flashes twice and then goes out, then the button enters the learning state.
(2) Place the original remote control close to the copy remote control, press and hold the button of the original remote control, the copy remote control LED flashes 3 times and then stays on, which means the code has been copied successfully.
(3) Other buttons are the same as the above button copy method.
Copy four keys:
When the key value automatically generated by copying compatible brands does not meet the requirements, you can use this function to copy any key value. Under this function, each group of remote can only copy one brand of remote. Ordinary non-encrypted remote control can also use this function.
(1) Press and hold the first button of the copy remote control, the LED flashes twice and then goes out, then the button enters the learning state. Keep the button, short press the second button three times, the LED flashes three times. Enter the 4-key copy mode.
(2) Place the original remote control close to the copy remote control, press and hold the button of the original remote control, the copy remote control LED flashes 3 times and then goes out, this means that the current code has been successfully copied, and the LED will be steady on after four consecutive copies of the keys are successful .
Code:
Press the first button and the second button of the copy remote control at the same time, and the LED flashes 3 times. One of the buttons is pressed 3 times, the other button is kept, the LED flashes continuously, and all information is cleared.
One-click code:
Press the first button and the second button of the copy remote control at the same time, the LED flashes 3 times. Release one button and keep the other button. Double-press the button that needs to be coded twice, wait for 2S, the LED flashes continuously, and clear the button information. This function is not available when copying data is brand remote control.
Return code:
Press the third button and the fourth button of the copy remote control at the same time until the LED flashes quickly to restore the last coded information.
Description:
Working voltage: 12V
Working current: ≤12mA
Working frequency: 433MHZ
Transmitting power: 10-15mw
Launch distance: 100 meters (open and barrier-free)
Frequency deviation: ±0.2MHz
Transmission rate: 50-60KHZ
Applicable type fixed code/learning code remote control, some rolling code type remote control
Product size 67.5 * 36 *