Nắp lưng kim loại Nắp đậy pin Xiaomi Redmi 5 chính hãng
100.000
₫ 60.000
Sản phẩm Nắp lưng kim loại Nắp đậy pin Xiaomi Redmi 5 chính hãng đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 100.000 xuống còn ₫ 60.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Original Back Replace For Redmi 5 Battery Cover Rear Door Housing Case Camera Glass Lens Frame
Features:
--100% Original For Xiaomi Redmi 5 Rear Housing Cover
--Protect your valuable investment from scratched and damage.
--It is used to Replace your broken, cracked, marked Battery Back Door Cover.
--Make your Phone new like before.
Instructions:
Disassemble the back cover:
1. First, use a household hair dryer to the edge of the back cover for 1-2 minutes (some machines are relatively tight, can not be opened and continue to , do not worry about burning the phone)
2. Second, press the back cover with the suction cup, slowly open a slit with force, insert the disassembled piece into the gap, and then slowly open it to open it. ((The suction cup should be tight, the suction is not enough to add some water)
Install the back cover:
1. First, after disassembling the back cover, it is necessary to clean the glue around the middle frame, first buckle it clean, wipe with , if not, wipe it with a wet towel. In short, there must be no residue, otherwise there will be any foreign matter. Lead to degumming later.
2. After cleaning, tear off all the green adhesive protective film on the back of the new back cover, and align it to ensure that it is stuck in one place. It can not be disassembled and reassembled twice, which will affect the viscosity of the glue. Once installed, the back cover will be pressed around for a wh
Features:
--100% Original For Xiaomi Redmi 5 Rear Housing Cover
--Protect your valuable investment from scratched and damage.
--It is used to Replace your broken, cracked, marked Battery Back Door Cover.
--Make your Phone new like before.
Instructions:
Disassemble the back cover:
1. First, use a household hair dryer to the edge of the back cover for 1-2 minutes (some machines are relatively tight, can not be opened and continue to , do not worry about burning the phone)
2. Second, press the back cover with the suction cup, slowly open a slit with force, insert the disassembled piece into the gap, and then slowly open it to open it. ((The suction cup should be tight, the suction is not enough to add some water)
Install the back cover:
1. First, after disassembling the back cover, it is necessary to clean the glue around the middle frame, first buckle it clean, wipe with , if not, wipe it with a wet towel. In short, there must be no residue, otherwise there will be any foreign matter. Lead to degumming later.
2. After cleaning, tear off all the green adhesive protective film on the back of the new back cover, and align it to ensure that it is stuck in one place. It can not be disassembled and reassembled twice, which will affect the viscosity of the glue. Once installed, the back cover will be pressed around for a wh