Bóng Bóp Thổi Khí Vệ Sinh Tròng Kính/Bàn Phím/Điện Thoại Tiện Lợi
₫ 13.400
Sản phẩm Bóng Bóp Thổi Khí Vệ Sinh Tròng Kính/Bàn Phím/Điện Thoại Tiện Lợi đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description：
Product use: Used for dust removal of optical lenses, but also for high-precision equipment such as computer motherboard dust removal, high-end watch movements
Features:
1. The PVC material is used for blowing balloons, anti-aging, no degumming, full of elasticity, tentacles are not sticky and do not fade. It will not be hard in winter.
2. Sufficient blowing volume, so that more dust has nowhere to hide.
Skills:
★ When using a blower, be careful not to blow the dust to a place where it cannot be cleaned. In principle, the lens should be downward when blowing dust, to prevent dust from entering the camera lens to the greatest extent. When you squeeze the sphere, you need to be fast so that you can generate a sufficient intensity of air flow. Since dust generally sticks to the surface of the lens horizontally, it is easier to blow away the dust by blowing from the side.
Instructions:
1. Use a blower to blow away dust and impurities attached to the lens
2. For dust and impurities that are firmly adhered and cannot be removed by blowing a balloon, you can gently wipe away with a cleaning brush
3. For fingerprints and oil on the lens. Generally, you can wipe it gently with a cleaning cloth. If necessary, you can spray the cleaning liquid on the lens cleaning paper 1 or 2 times, starting from the center of the lens surface and wiping it gently with a swirl. Finally, wipe again with a lens cloth. Do not spray the cleaning solution directly onto the lens.
4. Fingerprint oil stain on LCD screen, please use cleaning liquid as much as possible. The specific method is the same as the method of wiping lens with cleaning liquid.
5. For fine places such as the viewfinder, use a cotton swab to carefully remove the impurities inside. When not needed, you can use a small screwdriver to remove the fixing screws next to the viewfinder to achieve further cleaning.
Specification:
Name: Blow the dust ball
Material: environmental protection TEP material
Color: blue, black, green, pink, red
Blowing dust: 5.5 * 5.5 * 15 cm
Package included:
1pc * Blow the dust ball
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measure
Product use: Used for dust removal of optical lenses, but also for high-precision equipment such as computer motherboard dust removal, high-end watch movements
Features:
1. The PVC material is used for blowing balloons, anti-aging, no degumming, full of elasticity, tentacles are not sticky and do not fade. It will not be hard in winter.
2. Sufficient blowing volume, so that more dust has nowhere to hide.
Skills:
★ When using a blower, be careful not to blow the dust to a place where it cannot be cleaned. In principle, the lens should be downward when blowing dust, to prevent dust from entering the camera lens to the greatest extent. When you squeeze the sphere, you need to be fast so that you can generate a sufficient intensity of air flow. Since dust generally sticks to the surface of the lens horizontally, it is easier to blow away the dust by blowing from the side.
Instructions:
1. Use a blower to blow away dust and impurities attached to the lens
2. For dust and impurities that are firmly adhered and cannot be removed by blowing a balloon, you can gently wipe away with a cleaning brush
3. For fingerprints and oil on the lens. Generally, you can wipe it gently with a cleaning cloth. If necessary, you can spray the cleaning liquid on the lens cleaning paper 1 or 2 times, starting from the center of the lens surface and wiping it gently with a swirl. Finally, wipe again with a lens cloth. Do not spray the cleaning solution directly onto the lens.
4. Fingerprint oil stain on LCD screen, please use cleaning liquid as much as possible. The specific method is the same as the method of wiping lens with cleaning liquid.
5. For fine places such as the viewfinder, use a cotton swab to carefully remove the impurities inside. When not needed, you can use a small screwdriver to remove the fixing screws next to the viewfinder to achieve further cleaning.
Specification:
Name: Blow the dust ball
Material: environmental protection TEP material
Color: blue, black, green, pink, red
Blowing dust: 5.5 * 5.5 * 15 cm
Package included:
1pc * Blow the dust ball
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measure