(Mua-Code) Bộ Điều Khiển Atmega328P Nano 3.0 Cho Arduino Ch340
83.700
₫ 56.900
Sản phẩm (Mua-Code) Bộ Điều Khiển Atmega328P Nano 3.0 Cho Arduino Ch340 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 83.700 xuống còn ₫ 56.900, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Techspecs:
Microcontroller:ATmega328
USB Chip:CH340C
Architecture:AVR
Operating Voltage:5V
Flash Memory:32 KB of which 2 KB used by bootloader
EEPROM:1KB
Input Voltage:7-12V
Digitall/O Pins:22 (6 of which are PWM)
Note:
Itis aArduino compatible board,witha CH340C serial to TTL converterreplace the FT232.
Instructions:
1. Download the IDE
Download address: http://180.167.156.36:9090/image/shopee/variant1?color=FF3333&wm=buildvitbghy&src=http://arduino.cc/en/Main/Software (copy to open)
2. Download USB chip driver
Download address: http://180.167.156.36:9090/image/shopee/variant1?color=FF3333&wm=buildvitbghy&src=http://wch.cn/downloads.php?name=pro&proid=65
3. Plug in the NANO development board, the driver will be installed automatically
4. Select the board NANO in the die
5. Select the COM port, this can be checked in my computer, just the port in your uno development board
6. It is best to choose first, the routine program that comes with it, burn
Microcontroller:ATmega328
USB Chip:CH340C
Architecture:AVR
Operating Voltage:5V
Flash Memory:32 KB of which 2 KB used by bootloader
EEPROM:1KB
Input Voltage:7-12V
Digitall/O Pins:22 (6 of which are PWM)
Note:
Itis aArduino compatible board,witha CH340C serial to TTL converterreplace the FT232.
Instructions:
1. Download the IDE
Download address: http://180.167.156.36:9090/image/shopee/variant1?color=FF3333&wm=buildvitbghy&src=http://arduino.cc/en/Main/Software (copy to open)
2. Download USB chip driver
Download address: http://180.167.156.36:9090/image/shopee/variant1?color=FF3333&wm=buildvitbghy&src=http://wch.cn/downloads.php?name=pro&proid=65
3. Plug in the NANO development board, the driver will be installed automatically
4. Select the board NANO in the die
5. Select the COM port, this can be checked in my computer, just the port in your uno development board
6. It is best to choose first, the routine program that comes with it, burn