Môđun hiển thị OLED màu trắng/xanh lam/vàng-xanh lam 128x64 I2C SSD1306 12864 0.96 inch cho Arduino 7pin
85.258
₫ 60.500
Sản phẩm Môđun hiển thị OLED màu trắng/xanh lam/vàng-xanh lam 128x64 I2C SSD1306 12864 0.96 inch cho Arduino 7pin đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 85.258 xuống còn ₫ 60.500, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
parameter:
1. No backlight is required, and the display unit can emit light
2. Resolution: 128*64
3. Large viewing angle:> 160°
4. Support many control chips: fully compatible with Arduino, 51 series, MSP430 series, STM32/, CSR chips, etc.
5. Low power consumption: 0.08W when the full screen is lit, and 0.06W for normal full screen display of Chinese characters (far lower than TFT, LCD and other technologies)
6. Wide voltage support: directly support 3V~5V DC without any modification
7. Working temperature: -40°C~70°C
8. Module volume (length, width and thickness): 27.3MM*27.8MM*3.7MM
9. I0 port occupies less: using SPI or 1IC communication mode, up to 4 IO ports can be driven
10. Driver chip: SSD1306
11. No font library: use the modulo software to fetch words, and what to display. So easy!
Interface definition:
1> GND (power ground)
2> VCC (power supply positive 3.3~5V)
3> D0 (SPI clock line for SPI interface, IC clock line for IC interface)
4> D1 (SPI data line for SPI interface, IIC data line for IC interface)
5> RES (OLED reset, OLED needs to be reset once after power on)
6> DC (SPI data/command selection pin, used to set IC address when IC interface)
7> CS (OLEDSPI chip select, the bottom level is valid, if you don’t want to use it, you must ground it)
important:
OLED displays are different from LCDs; OLEDs are self-luminous; therefore, there is no backlight, and the screen will not have any response when only power is applied; the display must be correctly operated by the program. Please pay attention to this!
Note: Các sản phẩm có chất liệu vàng, kim cương, đá quý trong shop đều là xi mạ/ nhân
1. No backlight is required, and the display unit can emit light
2. Resolution: 128*64
3. Large viewing angle:> 160°
4. Support many control chips: fully compatible with Arduino, 51 series, MSP430 series, STM32/, CSR chips, etc.
5. Low power consumption: 0.08W when the full screen is lit, and 0.06W for normal full screen display of Chinese characters (far lower than TFT, LCD and other technologies)
6. Wide voltage support: directly support 3V~5V DC without any modification
7. Working temperature: -40°C~70°C
8. Module volume (length, width and thickness): 27.3MM*27.8MM*3.7MM
9. I0 port occupies less: using SPI or 1IC communication mode, up to 4 IO ports can be driven
10. Driver chip: SSD1306
11. No font library: use the modulo software to fetch words, and what to display. So easy!
Interface definition:
1> GND (power ground)
2> VCC (power supply positive 3.3~5V)
3> D0 (SPI clock line for SPI interface, IC clock line for IC interface)
4> D1 (SPI data line for SPI interface, IIC data line for IC interface)
5> RES (OLED reset, OLED needs to be reset once after power on)
6> DC (SPI data/command selection pin, used to set IC address when IC interface)
7> CS (OLEDSPI chip select, the bottom level is valid, if you don’t want to use it, you must ground it)
important:
OLED displays are different from LCDs; OLEDs are self-luminous; therefore, there is no backlight, and the screen will not have any response when only power is applied; the display must be correctly operated by the program. Please pay attention to this!
Note: Các sản phẩm có chất liệu vàng, kim cương, đá quý trong shop đều là xi mạ/ nhân
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000