Module cuộn dây tesla không hồ quang chạy pin mini DIY cho trẻ em
123.001
₫ 92.300
Sản phẩm Module cuộn dây tesla không hồ quang chạy pin mini DIY cho trẻ em đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 123.001 xuống còn ₫ 92.300, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
The newly developed primary coil of this product is already in the PCB board, no need to be wound on the outside, which is convenient for the fans to install, high efficiency and beautiful. It is a new design. The Benttera coil is safe and will not be electricity. If there is no arc, it can only be used to light the space. It can be used for students' experiments and curriculum design.
All devices are in-line, no device is patched, and there are few devices with high success rates for beginners.
DIY parts shipment list (device list)
Number of component names:
PCB board 1
Secondary coil 1
5th, 3 battery packs 1
Bulb 1
105 monolithic capacitor 1
8050 Transistor 1
20K resistor 1
3MM LED white hair blue 1
Secondary coil parameters:
Enameled wire diameter: 0.13 mm (paint 0.15 mm)
Skeleton material: PVC pipe
Skeleton outer diameter: 2 cm
Skeleton height: 4 cm or so
Number of turns: 200 laps
Winding direction: clockwise from bottom t
The newly developed primary coil of this product is already in the PCB board, no need to be wound on the outside, which is convenient for the fans to install, high efficiency and beautiful. It is a new design. The Benttera coil is safe and will not be electricity. If there is no arc, it can only be used to light the space. It can be used for students' experiments and curriculum design.
All devices are in-line, no device is patched, and there are few devices with high success rates for beginners.
DIY parts shipment list (device list)
Number of component names:
PCB board 1
Secondary coil 1
5th, 3 battery packs 1
Bulb 1
105 monolithic capacitor 1
8050 Transistor 1
20K resistor 1
3MM LED white hair blue 1
Secondary coil parameters:
Enameled wire diameter: 0.13 mm (paint 0.15 mm)
Skeleton material: PVC pipe
Skeleton outer diameter: 2 cm
Skeleton height: 4 cm or so
Number of turns: 200 laps
Winding direction: clockwise from bottom t