Mô Đun Thu Phát Không Dây Alli 2.4ghz 1100m Nrf24L01 + Pa + Lna Cho Arduino
64.592
₫ 41.186
Sản phẩm Mô Đun Thu Phát Không Dây Alli 2.4ghz 1100m Nrf24L01 + Pa + Lna Cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 64.592 xuống còn ₫ 41.186, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
Includes on board support components and the RFX2401C which is the PA (Power Amplifier) and LNA (Low-Noise Amplifier).
A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI).
Configuration registers are accessible through the SPI connection.
Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
On chip voltage regulator accepts supply voltages from 1.9 to 3.6V.
V tolerant inputs, allows for direct connection of SPI pins to the Arduino.
Internal filtering results in high margins of meeting RF regulatory standards.
Radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).
Includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.
Auto-acknowledge and auto-retransmit function.
Specification:
Weight: approx. 13.28 g
Board Size (with pins): approx. 40.7 x 15.5 x 12.2 mm/1.6 x 0.61 x 0.48 in
Antenna Size: approx. 87 x 9.5 mm/3.43 x 0.37 in
Work Range: 1100 m
Package Includes:
1 x Wireless Module
1 x An
Includes on board support components and the RFX2401C which is the PA (Power Amplifier) and LNA (Low-Noise Amplifier).
A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI).
Configuration registers are accessible through the SPI connection.
Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
On chip voltage regulator accepts supply voltages from 1.9 to 3.6V.
V tolerant inputs, allows for direct connection of SPI pins to the Arduino.
Internal filtering results in high margins of meeting RF regulatory standards.
Radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).
Includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.
Auto-acknowledge and auto-retransmit function.
Specification:
Weight: approx. 13.28 g
Board Size (with pins): approx. 40.7 x 15.5 x 12.2 mm/1.6 x 0.61 x 0.48 in
Antenna Size: approx. 87 x 9.5 mm/3.43 x 0.37 in
Work Range: 1100 m
Package Includes:
1 x Wireless Module
1 x An