Mô Đun Tăng Áp Nguồn Điện Usb-Dc-3.5-12V Đầu Ra-Dc-1.2-24V

#XY-UP #USB #Boost/Buck #Power #Supply #Module #Input-DC-3.5-12V #Output-DC-1.2-24V #USB #Step #Up/Down #Adjustable #Converter
specification:
Type: XY-UP USB boost/buck power supply module
Input voltage: DC 3.5-12V
Output voltage: DC 1.2-24V
Output Power:
Input 1.2-2V, output power within 2W
Input 2V-20V, output power within 3W
Input 20V-24V, output power is 2.5W
Display: 3Bit digital tube display
Dimensions: 6.7 x 2.9 cm (2.64 x 1.14 inches)
Quantity: 1 piece

Instructions for use:
1. Button
The "ON" button on the left: short press-control the on or off of the output terminal in the calibration mode to reduce the voltage or current value of a unit;
Long press-Long press for more than 3 seconds to release, the digital tube turns off, press any key to restore the display.
The "SW" button on the right: short press-switch between voltage, current and wheel display; long press-enter or exit calibration mode, enter the calibration voltage on the display voltage interface, and calibrate the current when entering the current interface.
2. Potentiometer knob
Rotating clockwise will increase the output voltage, rotating counterclockwise will decrease the output voltage. The stepless conversion voltage range is 1.2-24V.
3. Indicator
V——The indicator light indicates the current digital tube display voltage value, the unit is V;
A——The indicator light is on, indicating that the current digital tube displays the current value, the unit is A.
4. Input and output ports
Input terminal-on the left, USB male connector, microUSB and pad are selected as input, the input range is 3.5-12V.
Output-on the right, the blue 2P terminal is used as output, and the output range is 1.2-24V.


note:
1. Due to manual measurement, please allow 0-1 cm error. Make sure you don’t mind before bidding.
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

The package includes:
1 x XY-UP USB Boost / Buck power m