Mô đun tăng áp DC-DC 5-30V sang 1.25-30V 12V 24V 8A tự động [Thủ công]
273.800
₫ 145.900
Sản phẩm Mô đun tăng áp DC-DC 5-30V sang 1.25-30V 12V 24V 8A tự động [Thủ công] đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 273.800 xuống còn ₫ 145.900, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Specification:
Module Properties: non-isolated synchronous rectification automatic boost/buck converter module
Input voltage: DC 5V-30V
Input current: 8A (MAX), Peak 10A (6A work for long time working)
Static current: 4mA (different operating voltage the static current maybe have a little error)
Output voltage: 1.25V-30V(continuously adjustable)
Output Current: 10A (MAX) (natural cooling 5A for long time working)
Output constant current range: 0.2A-10A
Output power: Long time working 50W, the max can up to 100W, please make allowance to use.
Working temperature: -40 -85°C
Operating frequency: 150KHz
Conversion efficiency: typically 91% (12V to 12V 5A), the MAX 93%
Overcurrent protection: Yes
Short circuit protection: Yes (current-limiting protection)
Overtemperature protection: (automatically reduce the output voltage after overtemperature)
Input reverse polarity protection: None, (if necessary, install diode at input port)
Output prevent backflow : Yes, no need to add prevent backflow diode for charging .
Connect method: terminals, (IN is the input, OUT is the output)
Size: 60mm * 53mm * 22mm (L*W*H)
Application:
A regulated power supply.
Solar panels regulator.
Charge for the battery.
Drive high-power LED.
Power supply for your electronic device.
Output current adjustment method:
-Adjust CV potentiometer, according to your battery or LED, set the output voltage value to your need.
-Counterclockwise adjust CC potentiometer about 30 laps, make the output current in the minimum. Connect the LED, adjust CC potentiometer to the desired current. If charge for the battery, the battery should fully discharge at the first, then connected to the output, adjust CC potentiometer to desired current. (Must use completely discharged battery to set, otherwise inaccurate. Because the more battery power remain, the smaller the charge current. ) Please do not use short-circuit way to adjust current, because special circuit structure of the boost converter can not adjust in that way.
Package Included:
1 X DC-DC M
Module Properties: non-isolated synchronous rectification automatic boost/buck converter module
Input voltage: DC 5V-30V
Input current: 8A (MAX), Peak 10A (6A work for long time working)
Static current: 4mA (different operating voltage the static current maybe have a little error)
Output voltage: 1.25V-30V(continuously adjustable)
Output Current: 10A (MAX) (natural cooling 5A for long time working)
Output constant current range: 0.2A-10A
Output power: Long time working 50W, the max can up to 100W, please make allowance to use.
Working temperature: -40 -85°C
Operating frequency: 150KHz
Conversion efficiency: typically 91% (12V to 12V 5A), the MAX 93%
Overcurrent protection: Yes
Short circuit protection: Yes (current-limiting protection)
Overtemperature protection: (automatically reduce the output voltage after overtemperature)
Input reverse polarity protection: None, (if necessary, install diode at input port)
Output prevent backflow : Yes, no need to add prevent backflow diode for charging .
Connect method: terminals, (IN is the input, OUT is the output)
Size: 60mm * 53mm * 22mm (L*W*H)
Application:
A regulated power supply.
Solar panels regulator.
Charge for the battery.
Drive high-power LED.
Power supply for your electronic device.
Output current adjustment method:
-Adjust CV potentiometer, according to your battery or LED, set the output voltage value to your need.
-Counterclockwise adjust CC potentiometer about 30 laps, make the output current in the minimum. Connect the LED, adjust CC potentiometer to the desired current. If charge for the battery, the battery should fully discharge at the first, then connected to the output, adjust CC potentiometer to desired current. (Must use completely discharged battery to set, otherwise inaccurate. Because the more battery power remain, the smaller the charge current. ) Please do not use short-circuit way to adjust current, because special circuit structure of the boost converter can not adjust in that way.
Package Included:
1 X DC-DC M
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000