Mô Đun Sạc Pin Lithium B' Tp5000 4.2v/3.6v 1a Chuyên Dụng
40.633
₫ 25.599
Sản phẩm Mô Đun Sạc Pin Lithium B' Tp5000 4.2v/3.6v 1a Chuyên Dụng đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 40.633 xuống còn ₫ 25.599, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
TP5000 lithium ion battery lithium iron phosphate battery 1A current 4.2/3.6V
Function: Charge lithium battery and lithium iron phosphate battery. Full of self-stop. Red and green double lights indicate.
Size: 21.5*14.5*4.2mm
Usage: TP4056 4057 charging board usage is the same.
1. The lithium battery only needs to be connected to the 5V power supply, and the output B+B- can be connected to the battery. The red light is on during charging, and the battery is fully charged. The green light is on after charging.
2, for lithium iron phosphate battery 3.6V, just soldering iron to open the tin point between the two pads. The power battery connection method is unchanged as described above. If you need to change the charge to a 4.2V lithium battery, use the pad to solder it back.
Advantages: Switching buck mode, the efficiency is higher than the linear charging circuit, and the heat is much smaller. The charging current is 1A and is maintained at 1A during constant current charging. No additional heat dissipation is required, which reduces the effect of heat on the charging current. Reduce charging time. An optional lithium ion lithium polymer battery or lithium iron phosphate battery can be changed with only one jumper.
parameter:
Input: 4.5-9V (recommended not to exceed 7V)
Output voltage: 4.2V/3.6V plus or minus 1% jumper selection (board default lithium-ion battery 4.2V)
Output current: default 1A can be customized 0.5-2A, greater than 1.5A need to add heat
After the efficiency test, it will be described in detail. If the buyer tests the efficiency, it is not recommended to test the battery terminal voltage. Please skip the Rs sampling 0.1 ohm resistance test. In the test, the input power is close to the circuit board, and reducing the length of the connection will have an efficiency test. Impact, it is recommended to increase the capacitance test at the input. The voltage and current test suggests that the current meter with string accuracy is not recommended to read the power supply digital display directly. The current test can be directly connected in series with the positive electrode of the battery. It is only necessary to ensure that the battery is tested below the 3.9V using a large-scale ammeter.
We deal in wholesale and retail
Feel free to contact us
Skype:winniecai11
Whatsapp +86 13725560553
#TP5000 #4.2V #3.6V #1A #Lithium #Battery #Charging #Board #Charger #M
Function: Charge lithium battery and lithium iron phosphate battery. Full of self-stop. Red and green double lights indicate.
Size: 21.5*14.5*4.2mm
Usage: TP4056 4057 charging board usage is the same.
1. The lithium battery only needs to be connected to the 5V power supply, and the output B+B- can be connected to the battery. The red light is on during charging, and the battery is fully charged. The green light is on after charging.
2, for lithium iron phosphate battery 3.6V, just soldering iron to open the tin point between the two pads. The power battery connection method is unchanged as described above. If you need to change the charge to a 4.2V lithium battery, use the pad to solder it back.
Advantages: Switching buck mode, the efficiency is higher than the linear charging circuit, and the heat is much smaller. The charging current is 1A and is maintained at 1A during constant current charging. No additional heat dissipation is required, which reduces the effect of heat on the charging current. Reduce charging time. An optional lithium ion lithium polymer battery or lithium iron phosphate battery can be changed with only one jumper.
parameter:
Input: 4.5-9V (recommended not to exceed 7V)
Output voltage: 4.2V/3.6V plus or minus 1% jumper selection (board default lithium-ion battery 4.2V)
Output current: default 1A can be customized 0.5-2A, greater than 1.5A need to add heat
After the efficiency test, it will be described in detail. If the buyer tests the efficiency, it is not recommended to test the battery terminal voltage. Please skip the Rs sampling 0.1 ohm resistance test. In the test, the input power is close to the circuit board, and reducing the length of the connection will have an efficiency test. Impact, it is recommended to increase the capacitance test at the input. The voltage and current test suggests that the current meter with string accuracy is not recommended to read the power supply digital display directly. The current test can be directly connected in series with the positive electrode of the battery. It is only necessary to ensure that the battery is tested below the 3.9V using a large-scale ammeter.
We deal in wholesale and retail
Feel free to contact us
Skype:winniecai11
Whatsapp +86 13725560553
#TP5000 #4.2V #3.6V #1A #Lithium #Battery #Charging #Board #Charger #M
Sản Phẩm Liên Quan
HOT